Spiral bevel gearbox
Wanshsin WTHR spiral bevel gearbox
Right-angle high-radial-load WTH variant using a spiral bevel stage.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Wanshsin parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Configure Wanshsin WTHR
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP65 |
|---|---|
| Rated torque (max) | 2,050 Nm |
| Peak torque (max) | 6,150 Nm |
| Speed (max) | 6,000 rpm |
| Ratio | 4–200:1 |
| Backlash (max) | 4 arcmin |
| Sizes | 064, 090, 110, 140, 200 |
| Efficiency | >=95% 1-stage, >=92% 2-stage |
| Rated life | 20,000 h |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Wanshsin WTHR replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Wanshsin part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Apex Dynamics high-precision helical planetary with a one-piece stainless planet cage and very short length; ADS adds a keyed input shaft for belt pulley or coupling drive.
| Published maximum | WTHR | AD / ADR / ADS |
|---|---|---|
| Rated torque | 2,050 Nm | — |
| Peak torque | 6,150 Nm | — |
| Ratio (max) | 200:1 | — |
| Backlash (lower is better) | 4 arcmin | 1 arcmin meets or exceeds |
Apex Dynamics helical planetary range in inline (AE) and right-angle (AER) forms. AES/AESR are the all-stainless body versions with food-grade grease for washdown and corrosive areas.
| Published maximum | WTHR | AE / AER / AES / AESR |
|---|---|---|
| Rated torque | 2,050 Nm | — |
| Peak torque | 6,150 Nm | — |
| Ratio (max) | 200:1 | 200:1 meets or exceeds |
| Backlash (lower is better) | 4 arcmin | — |
Ultra-flat cup-type strain-wave gear with a very short axial length, light weight and high stiffness for its size.
| Published maximum | WTHR | LCD |
|---|---|---|
| Rated torque | 2,050 Nm | — |
| Peak torque | 6,150 Nm | — |
| Ratio (max) | 200:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 4 arcmin | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a spiral bevel gearbox is
A spiral bevel gearbox turns the drive through 90 degrees using bevel gears with curved, spiral teeth. Curved teeth engage gradually, giving smoother, quieter running and higher load capacity than straight bevels. In servo applications, a spiral bevel stage is often combined with a planetary stage to produce a right-angle precision gearbox. Efficiency is typically high, close to that of a planetary, which makes spiral bevel units preferable to worm gears where efficiency and back-drivability matter.
When engineers choose a spiral bevel gearbox
Choose a spiral bevel gearbox when the motor must sit at right angles to the output to save space, such as on gantries, conveyors and robot arms. It gives efficient, precise right-angle transmission. The trade-offs are cost and limited single-stage ratio compared with worm gears, which reach high ratios in one stage. For self-locking or very high ratios at low cost, a worm gear may suit better, but at lower efficiency.
How to specify the Wanshsin WTHR
Send these with your enquiry and an engineer can confirm the right WTHR variant:
- Ratio and output speed (:1, rpm)
- Output torque, nominal and peak (Nm)
- Backlash (arcmin)
- Input speed limit (rpm)
- Output shaft or hollow bore
- Motor interface
- Radial and axial load (N)
Common mistakes to avoid
- Assuming right-angle units match inline torque ratings
- Ignoring noise at high speed
- Not checking the mounting orientation for lubrication
- Overloading the output bearing with side loads
Wanshsin WTHR: frequently asked questions
Can you help replace Wanshsin WTHR or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Wanshsin WTHR?
Right-angle high-radial-load WTH variant using a spiral bevel stage. Published series figures include rated torque 2,050 Nm, peak torque 6,150 Nm, speed 6,000 rpm, ratio 4:1. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Wanshsin WTHR?
The Wanshsin WTHR is made by Wanshsin (WANSHSIN Seikou (Hunan) Co., Ltd.) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the rated torque of the Wanshsin WTHR?
The published series maximum rated torque is 2,050 Nm. Individual models and sizes in the WTHR range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Wanshsin WTHR?
We can assess suitable replacement options. On published figures, APEX Dynamics AD / ADR / ADS and APEX Dynamics AE / AER / AES / AESR are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Spiral bevel or worm gearbox for a right-angle drive?
Spiral bevel gears are more efficient, run cooler and back-drive freely, which suits servo axes and dynamic motion. Worm gears offer high ratios in one stage and may resist back-driving, but efficiency falls at high ratios. Choose spiral bevel for servo performance, worm for simple low-cost holding.
Is a right-angle gearbox less precise than an inline one?
Not necessarily, but the added bevel stage typically adds a little backlash and reduces stiffness. Precision right-angle planetaries combine a spiral bevel input stage with a planetary output and publish backlash figures. Compare the right-angle unit's figures directly with the inline version.
Further reading: How to select a gearbox · How to select a planetary gearbox · Gearboxes and harmonic drives
Often compared with
Engineers specifying this series often compare it with:
Other spiral bevel gearbox series
Engineer support
Need Wanshsin WTHR or a complete system around it?
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.