Rodless screw actuator
SMC LEJS rodless screw actuator
High-rigidity ball screw slider with AC servo motor in sizes 40 and 63; series maximum 85 kg horizontal load, 1,800 mm/s and 1,500 mm stroke at +/-0.01 mm repeatability.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need SMC parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of LEJS
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Stroke (max) | 1,500 mm |
|---|---|
| Linear speed (max) | 1,800 mm/s |
| Screw lead | 8 to 30 |
| Repeatability | 0.01 mm |
| Payload (max) | 85 kg |
| Motor | AC servo |
| Acceleration | 20,000 mm/s2 max |
Summarised in our own words from SMC Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
LEJS100-X400 (made to order, 750 W) handles 400 kg horizontal at 500 mm/s and up to 2,300 mm/s with 50 mm lead; not included in series maxima.
Specify Motion is not affiliated with SMC Corporation. SMC and LEJS are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
SMC LEJS replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original SMC part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Economical rodless screw actuator derived from the BC2 band cylinder, with solid-bearing rods and a stainless band seal for light to moderate loads.
| Published maximum | LEJS | BCS Rodless Screw (BCS/MCS) |
|---|---|---|
| Force | — | 11,700 N |
| Stroke | 1,500 mm | 3,048 mm meets or exceeds |
| Speed | 1,800 mm/s | — |
Screw-driven rodless actuator in six sizes, with a solid-bearing (S) or profiled-rail (P) carrier for moderate to heavy guided loads.
| Published maximum | LEJS | MXE Screw-Drive Rodless (MXE-S / MXE-P) |
|---|---|---|
| Force | — | 19,127 N |
| Stroke | 1,500 mm | 3,411 mm meets or exceeds |
| Speed | 1,800 mm/s | — |
Steel-belt driven linear module with integral guide rail, intended as a long-stroke, high-speed replacement for pneumatic cylinders.
| Published maximum | LEJS | LB Belt-Drive Linear Actuator |
|---|---|---|
| Stroke | 1,500 mm | 3,050 mm meets or exceeds |
| Speed | 1,800 mm/s | 2,000 mm/s meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a rodless screw actuator is
A rodless screw actuator moves a carriage along the actuator body using a ball or lead screw inside a profile. The load mounts directly on the carriage, which runs on guides, either internal bearings or profile rails, so the actuator carries and guides the load as well as moving it. A sealing band typically closes the slot along the body. The motor mounts at one end, inline or folded, and stroke is set by the body length.
When engineers choose a rodless screw actuator
Choose a rodless screw actuator when the load needs carrying along a guided path with good positioning accuracy and stiffness, such as in pick-and-place, gantries and positioning axes. Screw drive gives high thrust and precision. The trade-offs are speed and length: long screws hit critical speed limits, so long strokes run slower. For long, fast strokes with lighter loads, a belt-driven rodless actuator is usually better.
How to specify the SMC LEJS
Send these with your enquiry and an engineer can confirm the right LEJS variant or an equivalent:
- Payload mass and position offset (kg, mm)
- Moment loads on the carriage (Nm)
- Stroke (mm), speed (mm/s) and acceleration (m/s²)
- Thrust force needed (N)
- Repeatability (mm)
- Orientation: horizontal, vertical or wall-mounted
- Environment and sealing (IP code)
Common mistakes to avoid
- Ignoring moment loads from offset payloads
- Choosing a long stroke at high speed and exceeding screw critical speed
- Not adding a brake for vertical axes
- Assuming the sealing band keeps out fine dust or liquids
SMC LEJS: frequently asked questions
Can you help replace SMC LEJS or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the SMC LEJS?
High-rigidity ball screw slider with AC servo motor in sizes 40 and 63; series maximum 85 kg horizontal load, 1,800 mm/s and 1,500 mm stroke at +/-0.01 mm repeatability. Published series figures include stroke 1,500 mm, linear speed 1,800 mm/s, repeatability 0.01 mm, payload 85 kg. It is made by SMC Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the SMC LEJS?
The SMC LEJS is made by SMC (SMC Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with SMC Corporation; brand names are used only to identify the product.
What is the stroke of the SMC LEJS?
The published series maximum stroke is 1,500 mm. Individual models and sizes in the LEJS range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the SMC LEJS?
We can assess suitable replacement options. On published figures, Tolomatic BCS Rodless Screw (BCS/MCS) and Tolomatic MXE Screw-Drive Rodless (MXE-S / MXE-P) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Is a belt or screw rodless actuator better?
A screw rodless actuator gives more thrust, stiffness and positioning accuracy, which suits pressing, vertical axes and precise positioning. A belt actuator is faster and handles longer strokes, which suits transfer and pick-and-place over distance. Many machines use both: belts for long horizontal moves and screws for shorter, precise or vertical axes.
What limits the speed of a screw-driven actuator?
Speed is limited by the screw's critical speed, the rotation at which it starts to whip. Critical speed falls sharply as unsupported length increases, so long strokes have lower maximum speeds. Screw supports, larger diameters or a coarser lead raise usable speed. Manufacturers publish speed against stroke curves that should be checked.
Further reading: Rodless belt vs screw actuators · How to size a linear actuator · Linear actuators
Other rodless screw actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the SMC LEJS: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.