Rodless screw actuator
Tolomatic BCS Rodless Screw (BCS/MCS)
Economical rodless screw actuator derived from the BC2 band cylinder, with solid-bearing rods and a stainless band seal for light to moderate loads.
Key specifications
| Ingress protection | IP44 |
|---|---|
| Temperature | 4–54 °C |
| Force (max) | 11,700 N |
| Stroke (max) | 3,048 mm |
| Screw lead | 3.2, 5, 12 (metric); inch leads also |
| Screw type | ball (incl. low-backlash) or acme solid nut (incl. anti-backlash) |
| Backlash | 0.05 (BNL) to 0.38 |
| Duty | not stated |
| Sizes | BCS10, BCS15, BCS20 |
| Max load | 2,670 |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Options
- inline LMI or reverse-parallel 1:1/2:1
- auxiliary carrier (doubles load)
- floating mount
- tube supports
- mounting plates
- metric option
- food-grade grease
- reed, Hall or TRIAC switches
Typical applications
Light to moderate load transferPneumatic band cylinder replacement
Often compared with
Engineers specifying this series often compare it with:
Other rodless screw actuator series
Spec builder
Configure Tolomatic BCS Rodless Screw (BCS/MCS)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Step 1 of 5
Engineer support
Need Tolomatic BCS Rodless Screw (BCS/MCS) or a complete system around it?
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.