Brand overview
Tolomatic
US maker of electric rod and rodless actuators, including roller-screw and stainless hygienic designs used to replace hydraulic and pneumatic cylinders.
Tolomatic is a brand of Tolomatic Inc. (USA). Tolomatic products are available through our supply network.
Linear actuators
ERD (incl. ERD-SS1 / ERD-SS2 stainless options)
Economical stainless-tube electric rod actuator in sizes 10, 15 and 20, aimed at replacing pneumatic cylinders for gating, sorting and diverting; SS1/SS2 options give an all-stainless, IP69K washdown build.
RSH Hygienic Rod Actuator
All-316 stainless electric rod actuator with IP69K washdown rating and ball or roller screws, designed to hygienic guidelines for higher-force food, beverage and pharma tasks. Replaces the ERD22/25/30 hygienic sizes.
RSA-ST (standard thrust)
General-purpose electric rod actuator in six sizes with solid, bronze or ball screws and inline or reverse-parallel motor mounting; a broad pneumatic/hydraulic replacement workhorse.
RSA-HT (high thrust)
Heavy-duty version of the RSA rod actuator with roller-screw options, matched angular-contact bearings and larger motor mounts, reaching 58 kN on size 64.
GSA Guided Screw Actuator
RSA-based rod actuator with integral hardened guide rods, bearings and a tooling plate, so it can carry side and offset loads without external guidance.
RSX Extreme Force
High-force planetary roller-screw (and ball-screw) rod actuator up to 294 kN, positioned as a direct hydraulic cylinder replacement, with oil-cooled and food-grade versions.
IMA Integrated Motor Actuator
Rod actuator with a built-in servo motor driving a ball or roller screw, in four sizes up to 30.6 kN, offered in white food-grade and black heavy-duty finishes.
IMA-S / IMA-ST Stainless Integrated Actuator
Hygienic 316 stainless version of the IMA integrated servo actuator, IP69K rated, for volumetric filling, pumping and slicing in food and beverage plants.
SWA/B Resistance Spot Welding and GSWA
Tolomatic servo rod actuators for resistance spot-welding guns, listed only in the overview brochure.
TRS Twin Profile Rail Stage
Screw-driven rodless stage on twin profile rails with a wide, flat carrier, built for heavy, high-moment loads in machine tools, gantries and XYZ systems.
TKS Dual Profile Rail Bearing
Twin profile-rail screw stage listed in the Tolomatic overview brochure; appears to be the predecessor of the TRS family.
B3S Screw-Drive Rodless
Screw-driven rodless actuator with recirculating ball-bearing guidance integral to the extrusion, so it carries loads up to 35.6 kN (with carrier options) without external guides.
B3W Belt-Drive Rodless
Wide steel-cord urethane belt version of the B3 rodless actuator for long, fast strokes up to 14.6 m and 5 m/s with integral bearing guidance.
BCS Rodless Screw (BCS/MCS)
Economical rodless screw actuator derived from the BC2 band cylinder, with solid-bearing rods and a stainless band seal for light to moderate loads.
MXE Screw-Drive Rodless (MXE-S / MXE-P)
Screw-driven rodless actuator in six sizes, with a solid-bearing (S) or profiled-rail (P) carrier for moderate to heavy guided loads.
MXB Belt-Drive Rodless (MXB-U / MXB-S / MXB-P)
Belt-driven rodless actuator in six sizes for long, fast strokes, offered unguided (U), with self-cleaning solid bearings for dusty sites (S), or on profiled rail for heavy loads (P).
Spec builder
Specify Tolomatic parts or an equivalent
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Ask about Tolomatic parts or equivalents
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.