PCB-mount drive
Synapticon SOMANET Node PCB-mount drive
Ultra-compact board-level EtherCAT servo drives for PMSM and BLDC motors up to 60 V, in ratings of about 20–100 A, with TÜV-certified STO and SBC to SIL3 / PL e and an FSoE safety variant.
Key specifications
| Voltage (max) | 60 V |
|---|---|
| Data / bus | EtherCAT, FSoE (safety variant) |
| Power (max) | 2,000 W |
| Fieldbus | EtherCAT (CiA 402) |
| Current (max) | 100 A |
| Safety | STO and SBC, SIL3 / PL e (TÜV) |
| Safe torque off | yes |
Summarised in our own words from Synapticon GmbH's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Page gives 'up to 100 A / 66 A rms' without saying which is peak; 2,000 W figure is from the evaluation kit description (48 V / 66 A rms).
Specify Motion is not affiliated with Synapticon GmbH. Synapticon and SOMANET Node are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Synapticon part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
ADVANCED Motion Controls' ultra-compact, high power-density digital servo drives for 10-90 VDC systems, up to 100 A continuous and 200 A peak. They come in PCB, machine-embedded, panel and development-board formats, carry STO as standard, and run EtherCAT, CANopen or Ethernet/IP. Extended-environment models are rated -40 to +95 C.
| Published maximum | SOMANET Node | FlexPro Digital Servo Drives (FE, FX, … |
|---|---|---|
| Continuous current | 100 A | 100 A meets or exceeds |
| Peak current | — | 200 A |
| Power | 2,000 W | — |
Novanta's ultra-compact, power-dense servo drive for 8-72 VDC: 45 A continuous, 60 A peak, up to 5 kW, with a 75 kHz current loop. It comes as an SPI core module, a PCB-mount EtherCAT/CANopen board or a connectorised XCR unit, for cobot joints, humanoids and unmanned vehicles.
| Published maximum | SOMANET Node | Everest Servo Drives (EVE-CORE, EVE-NE… |
|---|---|---|
| Continuous current | 100 A | 45 A |
| Peak current | — | 60 A |
| Power | 2,000 W | 5,000 W meets or exceeds |
| Axes | — | 1 |
Network-capable AMC digital drives spanning 10-747 VDC and 120-480 VAC, up to 150 A continuous and 250 A peak (27.4 kW peak power), in PCB, panel, machine and vehicle formats. They support almost any motor type and feedback, plus CANopen, EtherCAT, POWERLINK and Modbus.
| Published maximum | SOMANET Node | DigiFlex Performance Servo Drives (DP,… |
|---|---|---|
| Continuous current | 100 A | 150 A meets or exceeds |
| Peak current | — | 250 A |
| Power | 2,000 W | 27,400 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a PCB-mount drive is
A PCB-mount servo drive is a compact servo drive module designed to be soldered or plugged into a host circuit board, rather than mounted in a cabinet. It contains the power stage and control loops for brushless, brushed or stepper-style motors, with interfaces such as CANopen, EtherCAT, SPI or analogue. Some versions are supplied with evaluation or carrier boards. Very high power density lets them fit inside robots, medical devices and instruments.
When engineers choose a PCB-mount drive
Choose a PCB-mount drive when the motor control must be embedded in the product, such as surgical robots, exoskeletons, AGVs, drones and laboratory instruments. It saves space and weight and integrates with the host board. The trade-offs are design responsibility and thermal management: the host board must provide heatsinking, connectors, EMC and protection. For machines with space for cabinets, packaged drives are simpler.
How to specify the Synapticon SOMANET Node
Send these with your enquiry and an engineer can confirm the right SOMANET Node variant or an equivalent:
- Supply voltage (V DC)
- Continuous and peak current (A)
- Motor and feedback type
- Interface: CANopen, EtherCAT, SPI or analogue
- Size and mounting (mm)
- Thermal path and heatsinking
- Safety functions and approvals
Common mistakes to avoid
- Ignoring the thermal path on the host board
- Not designing EMC filtering and protection
- Assuming evaluation board performance in a sealed product
- Leaving out testing for safety and medical approvals
Synapticon SOMANET Node: frequently asked questions
What is the Synapticon SOMANET Node?
Ultra-compact board-level EtherCAT servo drives for PMSM and BLDC motors up to 60 V, in ratings of about 20–100 A, with TÜV-certified STO and SBC to SIL3 / PL e and an FSoE safety variant. Published series figures include voltage 60 V, power 2,000 W, current 100 A. It is made by Synapticon GmbH; Specify Motion can help source it or propose an equivalent.
Who makes the Synapticon SOMANET Node?
The Synapticon SOMANET Node is made by Synapticon (Synapticon GmbH) and is listed here for engineers comparing options. Specify Motion is not affiliated with Synapticon GmbH; brand names are used only to identify the product.
What is the voltage of the Synapticon SOMANET Node?
The published series maximum voltage is 60 V. Individual models and sizes in the SOMANET Node range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Synapticon SOMANET Node?
Yes. On published figures, ADVANCED Motion Controls FlexPro Digital Servo Drives (FE, FX, FM, FD, FMP; Micro and Mini sizes) and Novanta Everest Servo Drives (EVE-CORE, EVE-NET, EVE-XCR) - Summit Series are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the benefit of a PCB-mount servo drive?
A PCB-mount drive puts motor control inside the product, saving space, weight and cabling. It integrates with the host electronics and can be very power-dense. The host board designer takes on thermal, EMC and protection design, so evaluation boards are often used first.
How is heat removed from a PCB-mount drive?
Heat is usually conducted through the drive's base or pins into the host board and a heatsink or chassis. Copper area, thermal interface materials and airflow all matter. Continuous current ratings often assume specific heatsinking, so check the conditions in the datasheet.
Further reading: How to select a pcb mount servo drive · How to select a servo drive · Servo drives
Other pcb-mount drive series
Spec builder
Specify what you need instead of SOMANET Node
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Synapticon SOMANET Node: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.