PCB-mount drive
ODrive Pro PCB-mount drive
Single-axis board-level FOC servo drive for BLDC/PMSM motors: 12–56 V, 70 A continuous and 100 A peak with heatsink and fan, up to 3 kW continuous / 5 kW peak, on a 51 × 64 mm board.
Key specifications
| Voltage (max) | 58 V |
|---|---|
| Data / bus | CAN 2.0B (1 Mbps), CAN FD (experimental), USB, UART, step/direction, PWM, analogue |
| Power (max) | 5,000 W |
| Supply | 12–56 VDC (58 V max) |
| Feedback | onboard MA702 magnetic encoder; offboard quadrature, Hall, SPI, SSI, RS485 (BiSS-C experimental) |
| Axes | 1 |
| Continuous current (max) | 70 A |
| Peak current (max) | 100 A |
| Weight | 35 g |
| Dimensions | 51 × 64 mm board |
Summarised in our own words from ODrive Robotics's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Power ratings 'with appropriate cooling'. Mass 35 g without screw terminals, 55 g with. Axis count of 1 is from the single-motor description; check.
Specify Motion is not affiliated with ODrive Robotics. ODrive Robotics and ODrive Pro are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with an ODrive Robotics part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
ADVANCED Motion Controls' ultra-compact, high power-density digital servo drives for 10-90 VDC systems, up to 100 A continuous and 200 A peak. They come in PCB, machine-embedded, panel and development-board formats, carry STO as standard, and run EtherCAT, CANopen or Ethernet/IP. Extended-environment models are rated -40 to +95 C.
| Published maximum | ODrive Pro | FlexPro Digital Servo Drives (FE, FX, … |
|---|---|---|
| Continuous current | 70 A | 100 A meets or exceeds |
| Peak current | 100 A | 200 A meets or exceeds |
| Power | 5,000 W | — |
| Axes | 1 | — |
Novanta's ultra-compact, power-dense servo drive for 8-72 VDC: 45 A continuous, 60 A peak, up to 5 kW, with a 75 kHz current loop. It comes as an SPI core module, a PCB-mount EtherCAT/CANopen board or a connectorised XCR unit, for cobot joints, humanoids and unmanned vehicles.
| Published maximum | ODrive Pro | Everest Servo Drives (EVE-CORE, EVE-NE… |
|---|---|---|
| Continuous current | 70 A | 45 A |
| Peak current | 100 A | 60 A |
| Power | 5,000 W | 5,000 W meets or exceeds |
| Axes | 1 | 1 meets or exceeds |
Network-capable AMC digital drives spanning 10-747 VDC and 120-480 VAC, up to 150 A continuous and 250 A peak (27.4 kW peak power), in PCB, panel, machine and vehicle formats. They support almost any motor type and feedback, plus CANopen, EtherCAT, POWERLINK and Modbus.
| Published maximum | ODrive Pro | DigiFlex Performance Servo Drives (DP,… |
|---|---|---|
| Continuous current | 70 A | 150 A meets or exceeds |
| Peak current | 100 A | 250 A meets or exceeds |
| Power | 5,000 W | 27,400 W meets or exceeds |
| Axes | 1 | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a PCB-mount drive is
A PCB-mount servo drive is a compact servo drive module designed to be soldered or plugged into a host circuit board, rather than mounted in a cabinet. It contains the power stage and control loops for brushless, brushed or stepper-style motors, with interfaces such as CANopen, EtherCAT, SPI or analogue. Some versions are supplied with evaluation or carrier boards. Very high power density lets them fit inside robots, medical devices and instruments.
When engineers choose a PCB-mount drive
Choose a PCB-mount drive when the motor control must be embedded in the product, such as surgical robots, exoskeletons, AGVs, drones and laboratory instruments. It saves space and weight and integrates with the host board. The trade-offs are design responsibility and thermal management: the host board must provide heatsinking, connectors, EMC and protection. For machines with space for cabinets, packaged drives are simpler.
How to specify the ODrive Pro
Send these with your enquiry and an engineer can confirm the right ODrive Pro variant or an equivalent:
- Supply voltage (V DC)
- Continuous and peak current (A)
- Motor and feedback type
- Interface: CANopen, EtherCAT, SPI or analogue
- Size and mounting (mm)
- Thermal path and heatsinking
- Safety functions and approvals
Common mistakes to avoid
- Ignoring the thermal path on the host board
- Not designing EMC filtering and protection
- Assuming evaluation board performance in a sealed product
- Leaving out testing for safety and medical approvals
ODrive Pro: frequently asked questions
What is the ODrive Pro?
Single-axis board-level FOC servo drive for BLDC/PMSM motors: 12–56 V, 70 A continuous and 100 A peak with heatsink and fan, up to 3 kW continuous / 5 kW peak, on a 51 × 64 mm board. Published series figures include voltage 58 V, power 5,000 W, axes 1, continuous current 70 A. It is made by ODrive Robotics; Specify Motion can help source it or propose an equivalent.
Who makes the ODrive Pro?
The ODrive Pro is made by ODrive Robotics and is listed here for engineers comparing options. Specify Motion is not affiliated with ODrive Robotics; brand names are used only to identify the product.
What is the voltage of the ODrive Pro?
The published series maximum voltage is 58 V. Individual models and sizes in the ODrive Pro range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the ODrive Pro?
Yes. On published figures, ADVANCED Motion Controls FlexPro Digital Servo Drives (FE, FX, FM, FD, FMP; Micro and Mini sizes) and Novanta Everest Servo Drives (EVE-CORE, EVE-NET, EVE-XCR) - Summit Series are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the benefit of a PCB-mount servo drive?
A PCB-mount drive puts motor control inside the product, saving space, weight and cabling. It integrates with the host electronics and can be very power-dense. The host board designer takes on thermal, EMC and protection design, so evaluation boards are often used first.
How is heat removed from a PCB-mount drive?
Heat is usually conducted through the drive's base or pins into the host board and a heatsink or chassis. Copper area, thermal interface materials and airflow all matter. Continuous current ratings often assume specific heatsinking, so check the conditions in the datasheet.
Further reading: How to select a pcb mount servo drive · How to select a servo drive · Servo drives
Other pcb-mount drive series
Spec builder
Specify what you need instead of ODrive Pro
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the ODrive Pro: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.