Optical absolute encoder
HEIDENHAIN RCN 6000 angle encoder
Large-bore absolute angle encoder with integral bearing whose 180 mm through-shaft lets cables and hydraulics pass through the axis.
Key specifications
| Bore (max) | 180 mm |
|---|---|
| Resolution (max) | 28 bit |
| Accuracy | system accuracy ±2" |
| Interface | EnDat 2.2, Fanuc αi, Mitsubishi high speed |
Summarised in our own words from DR. JOHANNES HEIDENHAIN GmbH's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
19,998 lines; integrated stator coupling; functional safety option.
Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH. HEIDENHAIN and RCN 6000 angle encoder are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a HEIDENHAIN part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
Multi-turn absolute hollow-shaft capacitive encoder that holds position through power loss, so no re-homing.
| Published maximum | RCN 6000 angle encoder | VLM |
|---|---|---|
| Resolution | 28 bit | 32 bit meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What an optical absolute encoder is
An optical absolute encoder reads a unique code pattern on a disc or scale, so every position has its own digital value and position is known immediately at power-up. Single-turn encoders give position within one revolution; multi-turn encoders also count revolutions using gears or electronic counters. Position is sent over a serial interface such as SSI or BiSS, a manufacturer-specific protocol, or a fieldbus. Optical scanning gives high resolution, typically 17 bits per revolution or more in servo encoders, and good accuracy.
When engineers choose an optical absolute encoder
Choose an optical absolute encoder where knowing position at power-up matters, such as robots, machine tools, multi-axis machines and axes that cannot be homed safely. It removes homing routines and supports safety functions. The trade-offs are cost, interface compatibility and contamination sensitivity. Battery-backed multi-turn types need battery maintenance; gear or energy-harvesting types avoid that. In very dirty environments, magnetic or inductive absolute encoders may suit better.
How to specify the HEIDENHAIN RCN 6000 angle encoder
Send these with your enquiry and an engineer can confirm the right RCN 6000 angle encoder variant or an equivalent:
- Single-turn resolution (bits)
- Multi-turn range (revolutions)
- Interface: SSI, BiSS, proprietary serial or fieldbus
- Accuracy (arcsec)
- Shaft or hollow shaft size (mm)
- Speed (rpm)
- Environment and safety rating
Common mistakes to avoid
- Choosing an interface the drive does not support
- Forgetting battery maintenance on battery-backed multi-turn types
- Confusing resolution with accuracy
- Ignoring cable length limits for serial interfaces
HEIDENHAIN RCN 6000 angle encoder: frequently asked questions
What is the HEIDENHAIN RCN 6000 angle encoder?
Large-bore absolute angle encoder with integral bearing whose 180 mm through-shaft lets cables and hydraulics pass through the axis. Published series figures include bore 180 mm, resolution 28 bit. It is made by DR. JOHANNES HEIDENHAIN GmbH; Specify Motion can help source it or propose an equivalent.
Who makes the HEIDENHAIN RCN 6000 angle encoder?
The HEIDENHAIN RCN 6000 angle encoder is made by HEIDENHAIN (DR. JOHANNES HEIDENHAIN GmbH) and is listed here for engineers comparing options. Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH; brand names are used only to identify the product.
What is the bore of the HEIDENHAIN RCN 6000 angle encoder?
The published series maximum bore is 180 mm. Individual models and sizes in the RCN 6000 angle encoder range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the HEIDENHAIN RCN 6000 angle encoder?
Yes. On published figures, Netzer Precision VLM is the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between single-turn and multi-turn absolute encoders?
A single-turn absolute encoder knows its angle within one revolution. A multi-turn absolute encoder also counts complete revolutions, so it knows total position over many turns even after power loss. Multi-turn encoders avoid homing on axes driven through screws or gears.
Which interface should an absolute encoder use?
Use the interface supported by the drive or controller. SSI is simple and widely supported, BiSS-C is an open bidirectional protocol, and several manufacturer-specific protocols are common on machine tools and servo drives. Fieldbus encoders suit PLC networks. Check cable lengths and update rates for the control loop.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical absolute encoder series
Spec builder
Specify what you need instead of RCN 6000 angle encoder
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the HEIDENHAIN RCN 6000 angle encoder: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.