Motion controller
Galil DMC-30000 motion controller
Single-axis Ethernet/RS-232 controller with optional built-in drive (800 W sinusoidal, 20 W linear, 1.4 A stepper or 6 A microstepper/servo), 125 µs servo update and 15 MHz encoder rate.
Key specifications
| Power (max) | 800 W |
|---|---|
| Fieldbus | Ethernet, RS-232 |
| Axes | 1 |
| Axes max | 1 |
| Servo update | 125 µs minimum |
| Encoder rate | 15 MHz |
| Io | 8 opto DI, 4 DO, 2 analog in, 2 analog out (16-bit) |
Summarised in our own words from Galil Motion Control's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Galil Motion Control. Galil and DMC-30000 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Galil part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 2 series from our supply network are the closest match on published figures.
Slim 54 mm EtherCAT motion controller programmed in CODESYS, running up to 32 synchronised axes on a 1 ms cycle with RP20 I/O expansion.
| Published maximum | DMC-30000 | AK (AK8 / AK840) |
|---|---|---|
| Axes | 1 | 32 meets or exceeds |
CODESYS-based PLC/motion controller with EtherCAT for 8, 16 or 32 axes plus 6 local pulse axes, dual-core SOC+FPGA and 32-module R2 I/O expansion.
| Published maximum | DMC-30000 | MC500 (MC508CS / MC516CS / MC532CS) |
|---|---|---|
| Axes | 1 | 32 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a motion controller is
A motion controller plans and coordinates movement for one or more axes, sending position, velocity or torque commands to servo or stepper drives. It generates trajectories with defined acceleration and jerk, synchronises axes for interpolation, electronic gearing and camming, and handles homing, limits and registration inputs. Commands reach drives over pulse, analogue or, most commonly now, EtherCAT and other real-time networks. Many controllers also include PLC functions to IEC 61131-3, combining logic and motion.
When engineers choose a motion controller
Choose a dedicated motion controller when a machine needs coordinated multi-axis motion beyond basic point-to-point moves, such as robots, gantries, packaging and CNC. It gives deterministic timing and motion libraries. The trade-offs are cost, programming effort and ecosystem lock-in. For simple machines with a few independent axes, a PLC with motion function blocks or intelligent drives with stored moves may be enough.
How to specify the Galil DMC-30000
Send these with your enquiry and an engineer can confirm the right DMC-30000 variant or an equivalent:
- Number of axes and drives
- Network and cycle time (ms)
- Motion functions: interpolation, camming, robotics
- Programming environment and languages
- I/O and expansion
- HMI and connectivity
- Safety integration
Common mistakes to avoid
- Choosing a controller that does not support the drives' network
- Underestimating cycle time needs for many axes
- Ignoring programming tools and skills in the team
- Not planning for future axis count
Galil DMC-30000: frequently asked questions
What is the Galil DMC-30000?
Single-axis Ethernet/RS-232 controller with optional built-in drive (800 W sinusoidal, 20 W linear, 1.4 A stepper or 6 A microstepper/servo), 125 µs servo update and 15 MHz encoder rate. Published series figures include power 800 W, axes 1. It is made by Galil Motion Control; Specify Motion can help source it or propose an equivalent.
Who makes the Galil DMC-30000?
The Galil DMC-30000 is made by Galil (Galil Motion Control) and is listed here for engineers comparing options. Specify Motion is not affiliated with Galil Motion Control; brand names are used only to identify the product.
What is the power of the Galil DMC-30000?
The published series maximum power is 800 W. Individual models and sizes in the DMC-30000 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Galil DMC-30000?
Yes. On published figures, Kinco AK (AK8 / AK840) and Leadshine MC500 (MC508CS / MC516CS / MC532CS) are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between a motion controller and a PLC?
A PLC handles machine logic, sequencing and I/O. A motion controller specialises in trajectory planning and coordinating axes. Many modern controllers combine both, running PLC logic and motion libraries on one CPU. Choose based on axis count, motion complexity and timing requirements.
Why is EtherCAT common for motion control?
EtherCAT offers short cycle times, precise synchronisation using distributed clocks and simple cabling, which suit coordinated multi-axis motion. Many drives and I/O devices support it. Other real-time networks such as PROFINET IRT and Sercos are also used, so check what the drives and controller support.
Further reading: How to select a motion controller or plc · Controllers and PLCs
Other motion controller series
Spec builder
Specify what you need instead of DMC-30000
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Galil DMC-30000: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.