Galil

Galil contact details

Head office

270 Technology Way, Suite 200
Rocklin, CA 95765
United States

Telephone +1 916 626 0101

Email support@galil.com

Website galil.com

Show Galil headquarters on the map Open in Google Maps →

Contact details as published by Galil Motion Control, checked 2026-10-30. Specify Motion is not affiliated with Galil Motion Control.

Galil product lines

Who Galil is

Galil Motion Control is a Californian company that designs and makes precision motion controllers and programmable I/O controllers. It credits itself with introducing the first microprocessor-based motion controller in 1983, the year it was founded, and reports more than one million controllers deployed in medical, aerospace, semiconductor and defence applications.

Galil’s controllers use a compact command language, run programs on the controller itself in up to eight threads, and can carry built-in amplifiers so a single unit both controls and drives several motors. It offers direct application engineering support and will customise controllers for OEMs, including dimensions, temperature ranges and firmware.

History and ownership

Jacob Tal and Wayne Baron founded Galil in 1983. Tal served as President for the first 20 years, and Baron, formerly a robotics manager at Hewlett-Packard’s central research laboratory, led product design and development as VP of Engineering. In July 2004 Baron became President and Tal chairman of the board. The company’s history page also tracks its applications and engineering team, with vice presidents for applications, operations and R&D appointed in 2012.

Galil’s website does not name a parent company. It cites more than 110 consecutive profitable quarters and more than 40 years of operation.

Motion controllers

Ethernet multi-axis controllers

The DMC-4000 is Galil’s best-selling performance controller for 1 to 8 axes. Servo update time is 62 µs for one or two axes, rising to 187.5 µs for eight, with a 22 MHz encoder rate and support for quadrature, BiSS, SSI and sin/cos feedback. It drives stepper, brushed and brushless servo, piezo, voice coil, galvanometer and hydraulic actuators, either through external amplifiers or plug-in internal amplifiers from 20 W linear types to the 1,200 W D3740 sinusoidal drive. It runs from 20–80 V DC with internal amplifiers. The DMC-4103 is the economy version, with 125 µs update for two axes and a 15 MHz encoder rate, sharing the same amplifier options.

Single-axis controller

The DMC-30000 is a single-axis Ethernet and RS-232 controller with a 125 µs minimum servo update and 15 MHz encoder rate. It can include an 800 W sinusoidal drive, a 20 W linear drive, a 1.4 A stepper drive or a 6 A microstepping / 800 W servo drive.

EtherCAT controllers

For networked axes, the DMC-52000 is an EtherCAT master for up to 32 axes at a 1 ms cycle. It works with Galil’s EDD-37010 smart drive and with EtherCAT drives from a list of other makers that Galil publishes, including AMC, Copley, Delta, Panasonic, Parker and Yaskawa, with others to be confirmed. The DMC-50000 is a hybrid that combines up to four local axes with Galil amplifiers and EtherCAT axes at 1 kHz. Our motion controllers hub explains centralised versus networked architectures.

Galil also sells PCI-card controllers (DMC-1806 and DMC-1802) and backwards-compatible models (DMC-4200, DMC-2105) that replace older DMC-2000 and DMC-2103 controllers, which helps when upgrading an existing machine without rewriting its program.

Programmable I/O controllers

The RIO family are small programmable controllers that use the same command language. The RIO-47100 packs 16 opto-isolated inputs, 8 outputs, 8 analogue inputs and 8 analogue outputs into a 3.88 x 4.2 x 1.10 inch metal enclosure, runs from 18–36 V DC or Power over Ethernet and supports PID loops. The RIO-47200 and RIO-47300 are DIN-rail versions, the latter with dual Ethernet, and the RIO-57400 is an EtherCAT remote I/O slave.

Technologies and software

Galil’s GDK software handles set-up and tuning, and its gclib API lets host applications on PCs talk to controllers over Ethernet. Program memory on the DMC-4000 holds 4,000 lines of 80 characters, 24,000 array elements and 510 variables, which is enough for most machine sequences to run on the controller rather than on a PC.

When specifying a Galil system, the key choices are axis count, whether amplifiers sit inside the controller or on an EtherCAT network, the motor and feedback types on each axis, and the supply: the internal-amplifier controllers run from a 20–80 V DC bus, so higher-voltage AC servo axes need external drives.

Industries served

Galil names medical, aerospace, semiconductor and defence applications. Its multi-technology amplifier options, including piezo, voice coil and galvanometer drives, suit laboratory automation, optics and test equipment as well as conventional servo axes. Our medical and laboratory and semiconductor and electronics pages cover typical requirements.

Global and UK presence

Galil operates from Rocklin, California, and its contact page lists no UK or European office or distributor. UK customers can deal with Galil directly by phone or email, and Galil offers direct application engineering support.

Sourcing Galil parts through Specify Motion

Specify Motion is independent of Galil Motion Control and is not affiliated with it. We can help you source Galil controllers for an existing machine, or propose equivalent controllers and drives from our supply network on published figures where a second source makes sense. The find a replacement form is the quickest way to send us a part number or nameplate.

Galil history: key dates

1. 1983Founded by Jacob Tal and Wayne Baron; introduces its first microprocessor-based motion controller
2. 1988First applications engineer joins
3. 2004Wayne Baron becomes President and Jacob Tal chairman of the board (July)
4. 2012New vice presidents appointed for applications, operations and R&D

Galil controllers, plcs and hmis

Motion controller

DMC-4000

Galil's performance Ethernet motion controller for 1 to 8 axes with servo update down to 62 µs, 22 MHz encoder rate and optional internal amplifiers up to 1,200 W for servo, stepper, piezo and voice coil motors.

Motion controller

DMC-4103

Economy Ethernet motion controller for 1 to 8 axes with 125 µs servo update for two axes, 15 MHz encoder input and the same internal amplifier options as the DMC-4000.

Motion controller

DMC-52000

EtherCAT master motion controller for up to 32 axes with a 1 ms cycle, working with Galil EDD-370x0 drives and listed third-party EtherCAT servo drives, with Ethernet and USB host links.

Motion controller

DMC-50000

Hybrid controller combining up to 4 local axes with Galil amplifiers and up to 8 EtherCAT axes at 1 kHz, 22 MHz encoder input and 20–80 V DC supply.

Motion controller

DMC-30000

Single-axis Ethernet/RS-232 controller with optional built-in drive (800 W sinusoidal, 20 W linear, 1.4 A stepper or 6 A microstepper/servo), 125 µs servo update and 15 MHz encoder rate.

PLC

RIO-47100

Compact Ethernet/RS-232 programmable controller in a small metal enclosure with 16 opto inputs, 8 outputs, 8 analog in and 8 analog out, PID support and 18–36 V DC or PoE supply.

Frequently asked questions

What is the Galil website?

The website is galil.com. It lists standard, EtherCAT, PCI, backwards-compatible and prior-generation motion controllers, the RIO programmable I/O controllers, and links to manuals, command references and the GDK set-up and tuning software, plus the company history and contact page.

What is Galil's phone number?

Galil's contact page lists +1 916 626 0101 for its Rocklin, California office, fax +1 916 626 0102, and support@galil.com as the email address. The page does not give a separate sales email, and it does not list any UK or European office or distributor.

Where is Galil Motion Control located?

Galil is at 270 Technology Way, Suite 200, Rocklin, CA 95765, in the Sacramento area of California. The company has operated since 1983 and describes itself as providing precision motion control since that year.

Who owns Galil?

Galil's website does not describe a parent company. It was founded in 1983 by Jacob Tal and Wayne Baron, who led it as President and VP of Engineering for around 20 years; in July 2004 Baron became President and Tal chairman of the board. Galil cites more than 110 consecutive profitable quarters.

Can I buy Galil controllers in the UK?

Galil's contact page lists only its Rocklin office and no UK distributor. UK engineers can contact Galil directly by phone or email for application engineering support, which Galil offers directly, and Galil also offers controller customisation such as dimensions, temperature ranges and firmware.

What does Galil make?

Galil makes multi-axis motion controllers: the Ethernet DMC-4000 and DMC-4103 for up to 8 axes, the single-axis DMC-30000, the EtherCAT master DMC-52000 (up to 32 axes) and DMC-50000, PCI-card controllers, the EDD-37010 EtherCAT drive and the RIO family of programmable I/O controllers.

Sources

1. Galil: Home
2. Galil: History
3. Galil: Contact
4. Galil: Products
5. Galil: Learn about our products
6. Galil: DMC-4000
7. Galil: DMC-4103
8. Galil: DMC-52000
9. Galil: DMC-50000
10. Galil: DMC-30000
11. Galil: RIO-47100

Figures are summarised from the sources above and from manufacturers' published data on the date shown. Always confirm against the current datasheet for your exact part.