Motion controller
FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)
Compact single-axis motion controllers for Faulhaber DC, brushless and linear motors, from PCB-mounted modules to housed units with CANopen and EtherCAT.
Key specifications
| Supply | 6-50 Vdc (6-30 V MC 3001; 6-36 V MC 36xx; 12-50 V MC 50xx) |
|---|---|
| Fieldbus | RS232, CANopen, EtherCAT |
| Axes | 1 |
| Continuous current (max) | 10 A |
Summarised in our own words from Dr. Fritz Faulhaber GmbH & Co. KG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Continuous current 1 A (MC 3001 B) to 10 A (MC 5010 S). MC 3602 B and MC 3606 B marked new. EtherCAT on some models via add-on module. Peak currents not published on the overview page. Reclassified 2026-10-30 from servo-drives/dc-drive: FAULHABER MC units are motion (positioning) controllers.
Specify Motion is not affiliated with Dr. Fritz Faulhaber GmbH & Co. KG. FAULHABER and MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a FAULHABER part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 2 series from our supply network are the closest match on published figures.
Slim 54 mm EtherCAT motion controller programmed in CODESYS, running up to 32 synchronised axes on a 1 ms cycle with RP20 I/O expansion.
| Published maximum | MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) | AK (AK8 / AK840) |
|---|---|---|
| Axes | 1 | 32 meets or exceeds |
CODESYS-based PLC/motion controller with EtherCAT for 8, 16 or 32 axes plus 6 local pulse axes, dual-core SOC+FPGA and 32-module R2 I/O expansion.
| Published maximum | MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) | MC500 (MC508CS / MC516CS / MC532CS) |
|---|---|---|
| Axes | 1 | 32 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a motion controller is
A motion controller plans and coordinates movement for one or more axes, sending position, velocity or torque commands to servo or stepper drives. It generates trajectories with defined acceleration and jerk, synchronises axes for interpolation, electronic gearing and camming, and handles homing, limits and registration inputs. Commands reach drives over pulse, analogue or, most commonly now, EtherCAT and other real-time networks. Many controllers also include PLC functions to IEC 61131-3, combining logic and motion.
When engineers choose a motion controller
Choose a dedicated motion controller when a machine needs coordinated multi-axis motion beyond basic point-to-point moves, such as robots, gantries, packaging and CNC. It gives deterministic timing and motion libraries. The trade-offs are cost, programming effort and ecosystem lock-in. For simple machines with a few independent axes, a PLC with motion function blocks or intelligent drives with stored moves may be enough.
How to specify the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)
Send these with your enquiry and an engineer can confirm the right MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) variant or an equivalent:
- Number of axes and drives
- Network and cycle time (ms)
- Motion functions: interpolation, camming, robotics
- Programming environment and languages
- I/O and expansion
- HMI and connectivity
- Safety integration
Common mistakes to avoid
- Choosing a controller that does not support the drives' network
- Underestimating cycle time needs for many axes
- Ignoring programming tools and skills in the team
- Not planning for future axis count
FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010): frequently asked questions
What is the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)?
Compact single-axis motion controllers for Faulhaber DC, brushless and linear motors, from PCB-mounted modules to housed units with CANopen and EtherCAT. Published series figures include axes 1, continuous current 10 A. It is made by Dr. Fritz Faulhaber GmbH & Co. KG; Specify Motion can help source it or propose an equivalent.
Who makes the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)?
The FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) is made by FAULHABER (Dr. Fritz Faulhaber GmbH & Co. KG) and is listed here for engineers comparing options. Specify Motion is not affiliated with Dr. Fritz Faulhaber GmbH & Co. KG; brand names are used only to identify the product.
What is the axes of the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)?
The published series maximum axes is 1. Individual models and sizes in the MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)?
Yes. On published figures, Kinco AK (AK8 / AK840) and Leadshine MC500 (MC508CS / MC516CS / MC532CS) are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between a motion controller and a PLC?
A PLC handles machine logic, sequencing and I/O. A motion controller specialises in trajectory planning and coordinating axes. Many modern controllers combine both, running PLC logic and motion libraries on one CPU. Choose based on axis count, motion complexity and timing requirements.
Why is EtherCAT common for motion control?
EtherCAT offers short cycle times, precise synchronisation using distributed clocks and simple cabling, which suit coordinated multi-axis motion. Many drives and I/O devices support it. Other real-time networks such as PROFINET IRT and Sercos are also used, so check what the drives and controller support.
Further reading: How to select a motion controller or plc · Controllers and PLCs
Other motion controller series
Spec builder
Specify what you need instead of MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.