DC servo motor
Portescap 35GLT high-performance brush DC servo motor
35 mm high-power coreless brush DC motor with 13-segment graphite-copper commutation: up to 160 mNm continuous, over 1.4 Nm stall torque, 10,000 rpm and 150 W continuous, wound for 24–90 V.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Portescap parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of 35GLT high-performance brush DC
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Outer diameter (max) | 35 mm |
|---|---|
| Rated torque (max) | 0.16 Nm |
| Peak torque (max) | 1.487 Nm |
| Speed (max) | 10,000 rpm |
| Power (max) | 150 W |
| Supply | 24–90 V nominal by winding |
| Efficiency | 85–89% |
| Commutation | graphite-copper, 13 segments |
Summarised in our own words from Regal Rexnord's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Figures for the 35GLT2R82; torque_Nm_peak_max is the highest listed stall torque, not a rated peak.
Specify Motion is not affiliated with Regal Rexnord. Portescap and 35GLT high-performance brush DC are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Portescap 35GLT high-performance brush DC replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Portescap part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
A single 110 mm, 1.2 kW, 48 VDC servo motor giving 4 Nm at 3000 rpm for higher-power low-voltage systems, paired with Kinco FD1 and OD drives.
| Published maximum | 35GLT high-performance brush DC | SMH Series Low-Voltage DC Servo Motor … |
|---|---|---|
| Rated torque | 0.16 Nm | 4 Nm meets or exceeds |
| Peak torque | 1.49 Nm | — |
| Speed | 10,000 rpm | — |
| Power | 150 W | 1,200 W meets or exceeds |
Low-voltage (24-48 VDC) brushless servo motors with a 12-slot/10-pole low-cogging design, IP65 and a choice of optical or magnetic, incremental or absolute encoders. Matched to Kinco FD1 and OD drives for battery-powered and mobile machines.
| Published maximum | 35GLT high-performance brush DC | SMC Series Low-Voltage DC Servo Motors |
|---|---|---|
| Rated torque | 0.16 Nm | — |
| Peak torque | 1.49 Nm | — |
| Speed | 10,000 rpm | — |
| Power | 150 W | 3,000 W meets or exceeds |
Low-voltage brushless DC servo motors for 48 or 96 VDC systems, with a 12-slot/10-pole design, matched to the Kinco FD1X5 drive and aimed at robotics, CNC and automated lines.
| Published maximum | 35GLT high-performance brush DC | SMK Series Low-Voltage DC Servo Motors |
|---|---|---|
| Rated torque | 0.16 Nm | — |
| Peak torque | 1.49 Nm | — |
| Speed | 10,000 rpm | — |
| Power | 150 W | 5,000 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a DC servo motor is
A DC servo motor, in current usage, is usually a low-voltage brushless permanent-magnet motor designed to run from a DC bus, typically 24 to 96 V, under closed-loop servo control. Electronically it works like an AC servo, with a three-phase stator commutated by the drive and encoder or Hall feedback on the shaft. The lower voltage means higher current for the same power, but suits battery-powered and safety-extra-low-voltage machines. Small precision brushless servomotors also fall into this group.
When engineers choose a DC servo motor
Choose a low-voltage DC servo for mobile robots, AGVs, battery equipment, medical devices and compact machines where mains voltage is impractical or unsafe. It allows simple power distribution and safe access. The trade-offs are current and power range: high current means thicker cables and higher losses, so power is typically limited to a few kilowatts. For mains-powered machines above that, an AC servo is usually simpler.
How to specify the Portescap 35GLT high-performance brush DC
Send these with your enquiry and an engineer can confirm the right 35GLT high-performance brush DC variant or an equivalent:
- Bus voltage (V DC) and battery range
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Continuous and peak current (A)
- Feedback type and resolution
- Brake, IP code and frame size (mm)
- Drive and network interface
Common mistakes to avoid
- Sizing at nominal battery voltage without checking the low-charge end
- Undersizing cables for the higher current
- Ignoring regenerative energy into a battery or supply
- Mixing motor and drive feedback types that are not compatible
Portescap 35GLT high-performance brush DC: frequently asked questions
Can you help replace Portescap 35GLT high-performance brush DC or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Portescap 35GLT high-performance brush DC?
35 mm high-power coreless brush DC motor with 13-segment graphite-copper commutation: up to 160 mNm continuous, over 1.4 Nm stall torque, 10,000 rpm and 150 W continuous, wound for 24–90 V. Published series figures include outer diameter 35 mm, rated torque 0.16 Nm, peak torque 1.487 Nm, speed 10,000 rpm. It is made by Regal Rexnord; Specify Motion can help source it or propose an equivalent.
Who makes the Portescap 35GLT high-performance brush DC?
The Portescap 35GLT high-performance brush DC is made by Portescap (Regal Rexnord) and is listed here for engineers comparing options. Specify Motion is not affiliated with Regal Rexnord; brand names are used only to identify the product.
What is the outer diameter of the Portescap 35GLT high-performance brush DC?
The published series maximum outer diameter is 35 mm. Individual models and sizes in the 35GLT high-performance brush DC range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Portescap 35GLT high-performance brush DC?
We can assess suitable replacement options. On published figures, Kinco SMH Series Low-Voltage DC Servo Motor (SMH110D) and Kinco SMC Series Low-Voltage DC Servo Motors are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between an AC servo and a DC servo motor?
Both are typically brushless permanent-magnet motors under closed-loop control. The main difference is the supply: AC servos are wound for drives fed from mains voltage, while DC servos are wound for low-voltage DC buses. DC servos suit battery and low-voltage machines; AC servos suit higher-power mains machines.
How does battery voltage affect a DC servo motor?
Motor speed is roughly proportional to available voltage, so as a battery discharges the top speed falls. Size the motor at the lowest working battery voltage. Also allow for regenerative energy during braking, which raises bus voltage and must be absorbed by the battery or a braking circuit.
Further reading: How to select a servo motor · How to select a dc motor · Servo and stepper motors
Other dc servo motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Portescap 35GLT high-performance brush DC: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.