Integrated servo motor
Leadshine iSV2 Integrated Low-Voltage Servo Motors
Leadshine motor-plus-drive units from 200 to 750 W on 24-48 VDC, with 17-bit magnetic encoders, CANopen or Modbus/pulse control and up to 300% overload, published in the Leadshine low-voltage DC catalogue.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Leadshine parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Configure Leadshine iSV2 Integrated Low-Voltage Servo Motors
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Rated torque | 0.64–2.39 Nm |
|---|---|
| Peak torque (max) | 7.2 Nm |
| Speed (max) | 4,000 rpm |
| Rated speed | 3,000 rpm |
| Power | 200–750 W |
| Frame sizes | 57, 60, 80, 86 mm |
| Supply | 24-48 VDC |
| Feedback | 17-bit magnetic encoder (ABZ incremental output) |
| Fieldbus | CANopen (CiA 301/402), Modbus RTU / RS485, Pulse + direction, RS232 tuning |
| Continuous current (max) | 19 A |
| Peak current (max) | 57 A |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Leadshine iSV2 Integrated Low-Voltage Servo Motors replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Leadshine part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
First-generation Kinco integrated servo motors for intelligent logistics: 200-750 W, 3000 rpm, with 16-bit absolute feedback and a choice of pulse, CANopen, EtherCAT or Profinet control.
| Published maximum | iSV2 Integrated Low-Voltage Servo Motors | MD Series Integrated Servo Motors (MD6… |
|---|---|---|
| Rated torque | 2.39 Nm | 2.39 Nm meets or exceeds |
| Peak torque | 7.2 Nm | — |
| Speed | 4,000 rpm | — |
| Power | 750 W | 750 W meets or exceeds |
Kinco integrated servo motors at 400 W to 1 kW in 60 and 80 mm flanges with optional STO, optional brake, IP20 or IP65 housings and Modbus, CANopen, EtherCAT or Profinet interfaces.
| Published maximum | iSV2 Integrated Low-Voltage Servo Motors | iSMD Integrated Servo Motors (iSMD60D/… |
|---|---|---|
| Rated torque | 2.39 Nm | — |
| Peak torque | 7.2 Nm | — |
| Speed | 4,000 rpm | — |
| Power | 750 W | 1,000 W meets or exceeds |
Kinco's latest integrated low-voltage servo motor with the drive built in, offered in 40, 60 and 80 mm frames from 100 to 750 W. It carries CANopen, Modbus RTU or EtherCAT, IP65 as standard (IP67 optional) and an optional gear reducer.
| Published maximum | iSV2 Integrated Low-Voltage Servo Motors | iSMK Series Integrated DC Servo Motors… |
|---|---|---|
| Rated torque | 2.39 Nm | — |
| Peak torque | 7.2 Nm | — |
| Speed | 4,000 rpm | — |
| Power | 750 W | 750 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Options
- With brake (G) or without (H)
What an integrated servo motor is
An integrated servo motor combines the servo motor, drive and feedback, and often a motion controller, in one housing. Power and communications connect directly to the motor, often over a single hybrid cable or a shared DC bus, so there is no separate drive in the cabinet. Control is by pulse, analogue, fieldbus or industrial Ethernet, and many units support stored motion profiles. The motor is usually brushless with an absolute or high-resolution encoder.
When engineers choose an integrated servo motor
Choose an integrated servo for distributed or modular machines, AGVs, and where cabinet space and wiring are limited. Fewer components and shorter cables simplify installation. The trade-offs are heat, power range and service: electronics sit on the motor in the machine environment, power is typically limited to a few hundred watts or a few kilowatts, and a failure means replacing the whole unit. For high-power or harsh-environment axes, separate drives are often better.
How to specify the Leadshine iSV2 Integrated Low-Voltage Servo Motors
Send these with your enquiry and an engineer can confirm the right iSV2 Integrated Low-Voltage Servo Motors variant:
- Power and continuous torque (W, Nm)
- Speed (rpm)
- Supply voltage: low-voltage DC or mains (V)
- Communication interface and protocol
- Feedback type and absolute position
- Safety functions such as STO
- IP code, ambient temperature and connectors
Common mistakes to avoid
- Mounting in a hot location and derating the integrated electronics
- Assuming all protocols are supported on all variants
- Leaving out STO where the risk assessment requires it
- Forgetting about spares when drive and motor are one part
Typical applications
Leadshine iSV2 Integrated Low-Voltage Servo Motors: frequently asked questions
Can you help replace Leadshine iSV2 Integrated Low-Voltage Servo Motors or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Leadshine iSV2 Integrated Low-Voltage Servo Motors?
Leadshine motor-plus-drive units from 200 to 750 W on 24-48 VDC, with 17-bit magnetic encoders, CANopen or Modbus/pulse control and up to 300% overload, published in the Leadshine low-voltage DC catalogue. Published series figures include rated torque 0.64 Nm, rated torque 2.39 Nm, peak torque 7.2 Nm, speed 4,000 rpm. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Leadshine iSV2 Integrated Low-Voltage Servo Motors?
The Leadshine iSV2 Integrated Low-Voltage Servo Motors is made by Leadshine (Leadshine Technology) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the rated torque of the Leadshine iSV2 Integrated Low-Voltage Servo Motors?
The published series minimum rated torque is 0.64 Nm. Individual models and sizes in the iSV2 Integrated Low-Voltage Servo Motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Leadshine iSV2 Integrated Low-Voltage Servo Motors?
We can assess suitable replacement options. On published figures, Kinco MD Series Integrated Servo Motors (MD60/MD80) and Kinco iSMD Integrated Servo Motors (iSMD60D/80D) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of an integrated servo motor?
An integrated servo reduces cabinet space, wiring and installation time because the drive is built into the motor. Shorter motor cables reduce EMC issues. This suits modular and mobile machines. The trade-off is that the electronics share the motor's environment and the whole unit must be replaced on a fault.
Do integrated servo motors support safe torque off?
Many do, as an option on selected models. STO removes power that could produce torque without removing the supply, and is used as a safety function in machine guarding. Check the safety integrity level or performance level achieved and that the variant you choose includes it.
Further reading: How to select an integrated servo motor · How to select a servo motor · Servo and stepper motors
Often compared with
Engineers specifying this series often compare it with:
Other integrated servo motor series
Engineer support
Need Leadshine iSV2 Integrated Low-Voltage Servo Motors or a complete system around it?
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.