Slip rings
Stemmann-Technik FP series (FPKK, FPKR) slip ring
Modular carbon/brass slip ring assemblies for rugged environments: FPKK units in glass-fibre reinforced plastic carry 25, 50 or 100 A per ring with 500 V AC insulation and up to PE + 17 poles, and the FPKR uses a steel housing.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Stemmann-Technik parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of FP series (FPKK, FPKR)
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Circuits (max) | 18 |
|---|---|
| Current per circuit (max) | 100 A |
| Voltage (max) | 500 V |
| Ingress protection | IP65 (intro) / IP66 (table) |
| Voltage note | 500 V AC insulation rating |
| Circuits note | PE + 17 poles on FPKK 54-25; LPKK contact-plate version up to 60 paths |
| Technology | brass rings, two bronze carbon brushes per ring |
| Options | thermostatic heater |
Summarised in our own words from Wabtec Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Page is inconsistent on IP (65 vs 66). Speed and temperature not published.
Specify Motion is not affiliated with Wabtec Corporation. Stemmann-Technik and FP series (FPKK, FPKR) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Stemmann-Technik FP series (FPKK, FPKR) itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing FP series (FPKK, FPKR) and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What a slip ring is
This group covers slip rings that do not fit a single standard format, including modular and split designs, contactless capacitive or optical data rings, temperature-rated units, quick-connect terminal designs, very high circuit counts and application-specific assemblies for wind turbines or packaging. All solve the same problem: transferring power, signals or data between stationary and rotating parts of a machine. What differs is the construction, which may be a split housing, a modular stack, a non-contact data path or a special material set.
When engineers choose a slip ring
Engineers look at these designs when a standard capsule, through-bore or pancake unit does not fit the job. Split rings suit retrofits onto existing shafts. Contactless data rings suit high data rates or long life without wear. Modular units allow circuit counts to change between machine variants. The trade-offs are cost, availability and, for custom designs, longer lead times and qualification. Match the construction to the real constraint, whether that is installation, data, temperature or circuit count.
How to specify the Stemmann-Technik FP series (FPKK, FPKR)
Send these with your enquiry and an engineer can confirm the right FP series (FPKK, FPKR) variant or an equivalent:
- What makes the application non-standard: installation, data, temperature, circuit count or format
- Circuits, current and voltage (A, V)
- Data protocols and rates
- Speed (rpm) and expected life (revolutions)
- Bore, envelope and mounting (mm)
- Temperature range (°C) and IP code
- Terminations, such as flying leads, connectors or quick-connect tabs
Common mistakes to avoid
- Choosing a special design when a standard type with minor changes would do
- Not stating the actual constraint, so the supplier offers the wrong format
- Assuming contactless data channels also carry power
- Underestimating lead time for custom or modular builds
Stemmann-Technik FP series (FPKK, FPKR): frequently asked questions
Can you help replace Stemmann-Technik FP series (FPKK, FPKR) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Stemmann-Technik FP series (FPKK, FPKR)?
Modular carbon/brass slip ring assemblies for rugged environments: FPKK units in glass-fibre reinforced plastic carry 25, 50 or 100 A per ring with 500 V AC insulation and up to PE + 17 poles, and the FPKR uses a steel housing. Published series figures include circuits 18, current per circuit 100 A, voltage 500 V. It is made by Wabtec Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the Stemmann-Technik FP series (FPKK, FPKR)?
The Stemmann-Technik FP series (FPKK, FPKR) is made by Stemmann-Technik (Wabtec Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with Wabtec Corporation; brand names are used only to identify the product.
What is the circuits of the Stemmann-Technik FP series (FPKK, FPKR)?
The published series maximum circuits is 18. Individual models and sizes in the FP series (FPKK, FPKR) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Stemmann-Technik FP series (FPKK, FPKR)?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
What is a split slip ring?
A split slip ring has a rotor and housing made in two halves, so it can be fitted around an existing shaft without removing the shaft or its bearings. It suits retrofits and large machines where disassembly would be costly. Expect tighter installation tolerances and possibly a lower speed rating than a one-piece unit.
What is a contactless slip ring?
A contactless slip ring transfers data, and sometimes power, across rotation without sliding contacts, using capacitive, inductive or optical coupling. There is no wear on the data path, so life is long and very high data rates are possible. Contactless power is usually limited, so many designs combine a contactless data channel with conventional power rings.
Further reading: How to select a slip ring · How to specify a slip ring · Slip rings
Other slip rings series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Stemmann-Technik FP series (FPKK, FPKR): the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.