AC servo motor
ABB (Motion) eSM servo motors
Economy permanent-magnet AC servo motors in 40 to 180 mm flange sizes, 100 W to 7.5 kW and 0.32 to 48 Nm continuous torque, IP67 apart from shaft opening and connectors, with single- or multi-turn absolute encoders.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need ABB (Motion) parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of eSM servo motors
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Voltage (max) | 480 V |
|---|---|
| Ingress protection | IP67 (except shaft opening and connectors) |
| Rated torque | 0.32–48 Nm |
| Peak torque (max) | 119 Nm |
| Power | 100–7,500 W |
| Frame sizes | 40, 60, 80, 130, 180 |
| Feedback | single-turn or multi-turn absolute encoder (23-bit on 10-pole models) |
| Brake | optional 24 V holding brake on ESM06, ESM08, ESM13, ESM18 |
Summarised in our own words from ABB Asea Brown Boveri Ltd's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2 · Source 3
Notes on this data
Product page technical data also says 'up to 15 kW' and 'up to 220 mm'; body text figures (100 W–7.5 kW, 40–180 mm) used. Peak torque 119 Nm from the e180/e190 catalogue (400 V eSM).
Specify Motion is not affiliated with ABB Asea Brown Boveri Ltd. ABB (Motion) and eSM servo motors are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
ABB (Motion) eSM servo motors replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original ABB (Motion) part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Kinco's established AC servo motor range from 40 to 180 mm frames, covering 50 W to 7.5 kW and up to 48 Nm rated torque. Standard feedback is a 2500-line incremental encoder with Hall commutation, with absolute options and a resolver on the 180 mm frame. Pairs with FD2S and CD2S drives.
| Published maximum | eSM servo motors | SMH Series AC Servo Motors (SMH40S-SMH… |
|---|---|---|
| Rated torque | 48 Nm | 48 Nm meets or exceeds |
| Peak torque | 119 Nm | — |
| Power | 7,500 W | 7,500 W meets or exceeds |
Leadshine's AC servo motors for the EL8/EL7/EL6 drives: ELM1 is the economy line and ELM2 the general-purpose line, both with 23-bit absolute encoders, IP65/IP67 sealing and up to 3.5x overload. The catalogue extends ELM2M to 22 kW and previews a 26-bit ELM3.
| Published maximum | eSM servo motors | ELM1 / ELM2 AC Servo Motors |
|---|---|---|
| Rated torque | 48 Nm | — |
| Peak torque | 119 Nm | — |
| Power | 7,500 W | 7,500 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an AC servo motor is
An AC servo motor is a permanent-magnet synchronous motor designed for closed-loop control of position, speed and torque. A wound stator is driven by a servo drive with sinusoidal three-phase current, while magnets on the rotor follow the rotating field. A high-resolution encoder or resolver on the shaft feeds position back to the drive, which adjusts current many thousands of times a second. The result is precise, dynamic motion with high peak torque, typically about three times the continuous rating for short periods.
When engineers choose an AC servo motor
Choose an AC servo for machine axes needing fast, accurate motion under varying loads, such as packaging, robotics, machine tools and printing. Compared with steppers, servos keep torque at high speed and cannot silently lose position. The trade-offs are cost and set-up: a servo needs a matched drive, feedback and tuning. For simple, low-speed indexing with a steady load, a stepper may be cheaper. For very low speeds and high torque, a gearbox or direct-drive motor may be needed.
How to specify the ABB (Motion) eSM servo motors
Send these with your enquiry and an engineer can confirm the right eSM servo motors variant or an equivalent:
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Load inertia and inertia ratio
- Supply voltage: 230 V single-phase or 400 V three-phase
- Feedback: incremental or absolute encoder, resolution (bits)
- Holding brake, IP code and shaft options
- Flange size and mounting (mm)
Common mistakes to avoid
- Sizing on peak torque without checking RMS torque over the cycle
- Ignoring load-to-motor inertia ratio, which makes tuning hard
- Forgetting the brake is for holding, not dynamic stopping
- Using a motor and drive pair that the supplier has not matched
ABB (Motion) eSM servo motors: frequently asked questions
Can you help replace ABB (Motion) eSM servo motors or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the ABB (Motion) eSM servo motors?
Economy permanent-magnet AC servo motors in 40 to 180 mm flange sizes, 100 W to 7.5 kW and 0.32 to 48 Nm continuous torque, IP67 apart from shaft opening and connectors, with single- or multi-turn absolute encoders. Published series figures include voltage 480 V, rated torque 0.32 Nm, rated torque 48 Nm, peak torque 119 Nm. It is made by ABB Asea Brown Boveri Ltd; Specify Motion can help source it or propose an equivalent.
Who makes the ABB (Motion) eSM servo motors?
The ABB (Motion) eSM servo motors is made by ABB (Motion) (ABB Asea Brown Boveri Ltd) and is listed here for engineers comparing options. Specify Motion is not affiliated with ABB Asea Brown Boveri Ltd; brand names are used only to identify the product.
What is the voltage of the ABB (Motion) eSM servo motors?
The published series maximum voltage is 480 V. Individual models and sizes in the eSM servo motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the ABB (Motion) eSM servo motors?
We can assess suitable replacement options. On published figures, Kinco SMH Series AC Servo Motors (SMH40S-SMH180D) and Leadshine ELM1 / ELM2 AC Servo Motors are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the inertia ratio in servo sizing?
The inertia ratio compares the load inertia reflected to the motor shaft with the motor's rotor inertia. High ratios make the axis harder to tune and slower to settle. Many engineers aim for below about 10:1, and lower for highly dynamic axes, using a gearbox to reduce reflected inertia where needed.
Do AC servo motors need an absolute encoder?
Not always. Incremental encoders need a homing routine after power-up, which is acceptable on many machines. Absolute encoders know their position at power-on, avoiding homing, which saves time and suits robots and multi-axis machines. Multi-turn absolute encoders track turns even when power is off.
Further reading: How to select a servo motor · Servo vs stepper · Servo and stepper motors
Other ac servo motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the ABB (Motion) eSM servo motors: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.