AC servo motor
Leadshine ELM1 / ELM2 AC Servo Motors
Leadshine's AC servo motors for the EL8/EL7/EL6 drives: ELM1 is the economy line and ELM2 the general-purpose line, both with 23-bit absolute encoders, IP65/IP67 sealing and up to 3.5x overload. The catalogue extends ELM2M to 22 kW and previews a 26-bit ELM3.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Leadshine parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Configure Leadshine ELM1 / ELM2 AC Servo Motors
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP65 or IP67 |
|---|---|
| Speed (max) | 6000 (ELM1) / 6500 (ELM2) |
| Power | 50–7,500 W |
| Frame sizes | 40, 180 mm |
| Supply | 220 VAC / 380-400 VAC |
| Feedback | 23-bit multi-turn absolute, magnetic or optical, 23-bit battery-less absolute (ELM2) |
| Overload | up to 3.5x |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Leadshine ELM1 / ELM2 AC Servo Motors replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Leadshine part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Kinco's established AC servo motor range from 40 to 180 mm frames, covering 50 W to 7.5 kW and up to 48 Nm rated torque. Standard feedback is a 2500-line incremental encoder with Hall commutation, with absolute options and a resolver on the 180 mm frame. Pairs with FD2S and CD2S drives.
| Published maximum | ELM1 / ELM2 AC Servo Motors | SMH Series AC Servo Motors (SMH40S-SMH… |
|---|---|---|
| Rated torque | — | 48 Nm |
| Power | 7,500 W | 7,500 W meets or exceeds |
Kinco's current-generation AC servo motor line, matched to the JD2 and FD5P PRO drives. Small-inertia 40-80 mm frames run at 3000 rpm on 220 V; large-inertia 130 and 180 mm frames are 1500 rpm machines reaching 47.8 Nm rated and 7.5 kW, with 23-bit multi-turn absolute encoders as standard.
| Published maximum | ELM1 / ELM2 AC Servo Motors | SMK Series AC Servo Motors (SMK40S/60S… |
|---|---|---|
| Rated torque | — | 47.8 Nm |
| Peak torque | — | 119.5 Nm |
| Speed | — | 6,000 rpm |
| Power | 7,500 W | 7,500 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Options
- Optional brake
- Oil seal on all series
- Direct or aviation connector
- ELM2M 11-22 kW (catalogue)
- ELM3 26-bit optical, 7000 rpm max (catalogue; status unclear)
Typical applications
What an AC servo motor is
An AC servo motor is a permanent-magnet synchronous motor designed for closed-loop control of position, speed and torque. A wound stator is driven by a servo drive with sinusoidal three-phase current, while magnets on the rotor follow the rotating field. A high-resolution encoder or resolver on the shaft feeds position back to the drive, which adjusts current many thousands of times a second. The result is precise, dynamic motion with high peak torque, typically about three times the continuous rating for short periods.
When engineers choose an AC servo motor
Choose an AC servo for machine axes needing fast, accurate motion under varying loads, such as packaging, robotics, machine tools and printing. Compared with steppers, servos keep torque at high speed and cannot silently lose position. The trade-offs are cost and set-up: a servo needs a matched drive, feedback and tuning. For simple, low-speed indexing with a steady load, a stepper may be cheaper. For very low speeds and high torque, a gearbox or direct-drive motor may be needed.
How to specify the Leadshine ELM1 / ELM2 AC Servo Motors
Send these with your enquiry and an engineer can confirm the right ELM1 / ELM2 AC Servo Motors variant:
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Load inertia and inertia ratio
- Supply voltage: 230 V single-phase or 400 V three-phase
- Feedback: incremental or absolute encoder, resolution (bits)
- Holding brake, IP code and shaft options
- Flange size and mounting (mm)
Common mistakes to avoid
- Sizing on peak torque without checking RMS torque over the cycle
- Ignoring load-to-motor inertia ratio, which makes tuning hard
- Forgetting the brake is for holding, not dynamic stopping
- Using a motor and drive pair that the supplier has not matched
Leadshine ELM1 / ELM2 AC Servo Motors: frequently asked questions
Can you help replace Leadshine ELM1 / ELM2 AC Servo Motors or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Leadshine ELM1 / ELM2 AC Servo Motors?
Leadshine's AC servo motors for the EL8/EL7/EL6 drives: ELM1 is the economy line and ELM2 the general-purpose line, both with 23-bit absolute encoders, IP65/IP67 sealing and up to 3.5x overload. The catalogue extends ELM2M to 22 kW and previews a 26-bit ELM3. Published series figures include power 50 W, power 7,500 W. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Leadshine ELM1 / ELM2 AC Servo Motors?
The Leadshine ELM1 / ELM2 AC Servo Motors is made by Leadshine (Leadshine Technology) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the power of the Leadshine ELM1 / ELM2 AC Servo Motors?
The published series minimum power is 50 W. Individual models and sizes in the ELM1 / ELM2 AC Servo Motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Leadshine ELM1 / ELM2 AC Servo Motors?
We can assess suitable replacement options. On published figures, Kinco SMH Series AC Servo Motors (SMH40S-SMH180D) and Kinco SMK Series AC Servo Motors (SMK40S/60S/80S, SMK130G, SMK180G) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the inertia ratio in servo sizing?
The inertia ratio compares the load inertia reflected to the motor shaft with the motor's rotor inertia. High ratios make the axis harder to tune and slower to settle. Many engineers aim for below about 10:1, and lower for highly dynamic axes, using a gearbox to reduce reflected inertia where needed.
Do AC servo motors need an absolute encoder?
Not always. Incremental encoders need a homing routine after power-up, which is acceptable on many machines. Absolute encoders know their position at power-on, avoiding homing, which saves time and suits robots and multi-axis machines. Multi-turn absolute encoders track turns even when power is off.
Further reading: How to select a servo motor · Servo vs stepper · Servo and stepper motors
Often compared with
Engineers specifying this series often compare it with:
Other ac servo motor series
Engineer support
Need Leadshine ELM1 / ELM2 AC Servo Motors or a complete system around it?
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.