Ironless linear motor
Tecnotion UXX ironless linear motors
Tecnotion's largest ironless linear motors (UXX3 to UXX18) with 141 to 846 N continuous and 700 to 4,200 N peak force, aimed at flat panel and semiconductor machines.
Key specifications
| Peak force (max) | 4,200 N |
|---|---|
| Continuous force (max) | 846 N |
Summarised in our own words from Tecnotion B.V.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Specify Motion is not affiliated with Tecnotion B.V.. Tecnotion and UXX ironless linear motors are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Tecnotion part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
U-channel ironless linear motors with zero cogging, six sizes from 3 N to nearly 2 kN continuous, for fast settling precision stages.
| Published maximum | UXX ironless linear motors | AUM |
|---|---|---|
| Peak force | 4,200 N | 16,200 N meets or exceeds |
| Continuous force | 846 N | 1,980 N meets or exceeds |
| Speed | — | 5 m/s |
High-force iron-core linear motors in five widths with optional water cooling, reaching several kN continuous.
| Published maximum | UXX ironless linear motors | AKM |
|---|---|---|
| Peak force | 4,200 N | 12,884.3 N meets or exceeds |
| Continuous force | 846 N | 6,190.1 N meets or exceeds |
| Speed | — | 5 m/s |
Curved (arc-segment) ironless motors for limited-angle or 360-degree rotary motion on large radii, zero cogging and zero attraction force.
View ACR →Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What an ironless linear motor is
An ironless linear motor, also called a coreless or U-channel linear motor, has a coil assembly with no iron, typically encapsulated in epoxy, moving inside a U-shaped channel lined with magnets on both sides. With no iron in the moving part, there is no cogging and no magnetic attraction between forcer and track. The forcer is light, so acceleration can be very high. Like other linear motors, it drives the load directly and relies on a linear encoder and external guides.
When engineers choose an ironless linear motor
Choose an ironless linear motor for very smooth motion, constant velocity and fast settling with light to moderate loads, such as scanning, metrology, semiconductor and inspection. The trade-offs are force density and heat: without an iron core, continuous force per size is lower and the coil has less thermal mass. The U-channel track is also bulkier and more expensive per metre. For heavy loads or high continuous force, an iron-core design is usually more economical.
How to specify the Tecnotion UXX ironless linear motors
Send these with your enquiry and an engineer can confirm the right UXX ironless linear motors variant or an equivalent:
- Peak and continuous force (N)
- Moving mass and payload (kg)
- Velocity ripple or smoothness requirement
- Stroke and speed (mm, m/s)
- Settling time and positioning accuracy (ms, µm)
- Thermal limits and cooling
- Encoder type and resolution
Common mistakes to avoid
- Using peak force for continuous duty and overheating the coil
- Ignoring cable management on a moving coil
- Assuming guides can be lighter without considering stiffness
- Choosing ironless where an iron-core motor would provide more force for less cost
Tecnotion UXX ironless linear motors: frequently asked questions
What is the Tecnotion UXX ironless linear motors?
Tecnotion's largest ironless linear motors (UXX3 to UXX18) with 141 to 846 N continuous and 700 to 4,200 N peak force, aimed at flat panel and semiconductor machines. Published series figures include peak force 4,200 N, continuous force 846 N. It is made by Tecnotion B.V.; Specify Motion can help source it or propose an equivalent.
Who makes the Tecnotion UXX ironless linear motors?
The Tecnotion UXX ironless linear motors is made by Tecnotion (Tecnotion B.V.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Tecnotion B.V.; brand names are used only to identify the product.
What is the peak force of the Tecnotion UXX ironless linear motors?
The published series maximum peak force is 4,200 N. Individual models and sizes in the UXX ironless linear motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Tecnotion UXX ironless linear motors?
Yes. On published figures, Akribis Systems AUM and Akribis Systems AKM are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
Why do ironless linear motors have no cogging?
Cogging comes from iron being attracted to individual magnets as it passes over them. An ironless forcer has no iron in the moving part, so there is nothing to be pulled towards the magnets and the force is smooth. This gives very low velocity ripple, which suits scanning and precise constant-speed motion.
Are ironless linear motors less powerful?
For a given size, ironless motors typically produce less continuous force than iron-core motors and have less thermal mass to absorb heat. Their light forcers allow very high acceleration, so the moving system can still be very dynamic. For heavy loads, iron-core motors are often more economical.
Further reading: How to select a linear motor · Linear actuators
Other ironless linear motor series
Spec builder
Specify what you need instead of UXX ironless linear motors
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Tecnotion UXX ironless linear motors: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.