Roller screw actuator
Bosch Rexroth EMC-HP electromechanical cylinder roller screw actuator
High-power electromechanical cylinder with a planetary screw drive, delivering up to 250 kN axial force, 1,500 mm stroke and 0.83 m/s travel speed (series maxima), IP54.
Key specifications
| Ingress protection | IP54 |
|---|---|
| Force (max) | 250,000 N |
| Stroke (max) | 1,500 mm |
| Linear speed (max) | 830 mm/s |
| Screw type | high-precision planetary screw drive (sizes 60 and 75) |
| Dynamic load capacity kN | 473 |
Summarised in our own words from Robert Bosch GmbH's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Robert Bosch GmbH. Bosch Rexroth and EMC-HP electromechanical cylinder are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Bosch Rexroth part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Heavy-duty version of the RSA rod actuator with roller-screw options, matched angular-contact bearings and larger motor mounts, reaching 58 kN on size 64.
| Published maximum | EMC-HP electromechanical cylinder | RSA-HT (high thrust) |
|---|---|---|
| Force | 250,000 N | 58,000 N |
| Stroke | 1,500 mm | 1,524 mm meets or exceeds |
| Speed | 830 mm/s | 3,124 mm/s meets or exceeds |
High-force planetary roller-screw (and ball-screw) rod actuator from 89 kN (RSX10) up to 445 kN (100,000 lbf, RSX50) series maximum, positioned as a direct hydraulic cylinder replacement, with oil-cooled and food-grade versions.
| Published maximum | EMC-HP electromechanical cylinder | RSX Extreme Force |
|---|---|---|
| Force | 250,000 N | 445,000 N meets or exceeds |
| Stroke | 1,500 mm | 1,500 mm meets or exceeds |
| Speed | 830 mm/s | 760 mm/s |
Steel-belt driven linear module with integral guide rail, intended as a long-stroke, high-speed replacement for pneumatic cylinders.
| Published maximum | EMC-HP electromechanical cylinder | LB Belt-Drive Linear Actuator |
|---|---|---|
| Force | 250,000 N | — |
| Stroke | 1,500 mm | 3,050 mm meets or exceeds |
| Speed | 830 mm/s | 2,000 mm/s meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a roller screw actuator is
A roller screw actuator is a rod actuator driven by a planetary roller screw instead of a ball screw. Threaded rollers sit between the screw and nut, so the load is spread across many line contacts rather than a limited number of balls. This gives much higher load capacity, stiffness and shock resistance in the same envelope, and typically several times the life of a ball screw of similar size. Inverted designs place the rollers on the rod, allowing the motor rotor to drive the nut directly.
When engineers choose a roller screw actuator
Choose a roller screw actuator for high forces, long life, heavy duty cycles or shock loads, such as presses, welding guns, test rigs and hydraulic replacement. The trade-offs are cost, which is higher than an equivalent ball screw, and lower efficiency at very fine leads. For moderate loads and duty, a ball screw is usually more economical. Roller screws also tolerate higher accelerations and speeds at a given diameter, which helps compact high-force designs.
How to specify the Bosch Rexroth EMC-HP electromechanical cylinder
Send these with your enquiry and an engineer can confirm the right EMC-HP electromechanical cylinder variant or an equivalent:
- Peak and continuous force (N or kN)
- Full motion profile with dwell times
- Required life (km or cycles)
- Stroke (mm) and speed (mm/s)
- Shock or impact loads
- Mounting and side-load conditions
- Lubrication method and environment
Common mistakes to avoid
- Choosing a roller screw when duty and load would let a ball screw do the job
- Neglecting lubrication interval, which strongly affects roller screw life
- Calculating life on peak force instead of the cubic mean load
- Forgetting that motor and drive must also handle the peak force
Bosch Rexroth EMC-HP electromechanical cylinder: frequently asked questions
What is the Bosch Rexroth EMC-HP electromechanical cylinder?
High-power electromechanical cylinder with a planetary screw drive, delivering up to 250 kN axial force, 1,500 mm stroke and 0.83 m/s travel speed (series maxima), IP54. Published series figures include force 250,000 N, stroke 1,500 mm, linear speed 830 mm/s. It is made by Robert Bosch GmbH; Specify Motion can help source it or propose an equivalent.
Who makes the Bosch Rexroth EMC-HP electromechanical cylinder?
The Bosch Rexroth EMC-HP electromechanical cylinder is made by Bosch Rexroth (Robert Bosch GmbH) and is listed here for engineers comparing options. Specify Motion is not affiliated with Robert Bosch GmbH; brand names are used only to identify the product.
What is the force of the Bosch Rexroth EMC-HP electromechanical cylinder?
The published series maximum force is 250,000 N. Individual models and sizes in the EMC-HP electromechanical cylinder range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Bosch Rexroth EMC-HP electromechanical cylinder?
Yes. On published figures, Tolomatic RSA-HT (high thrust) and Tolomatic RSX Extreme Force are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
Why are roller screws longer lasting than ball screws?
In a planetary roller screw, the load is carried across many line contacts on the threaded rollers, while a ball screw carries load through point contacts on a limited number of balls. Lower contact stress per point gives more load capacity and a longer fatigue life for the same size, typically several times longer at the same load.
When is a ball screw a better choice than a roller screw?
A ball screw is usually better value for moderate loads, normal duty and modest life targets, and it is more widely available in standard sizes and leads. Choose a roller screw when force, shock, stiffness or life requirements push a ball screw beyond a sensible size. Calculating life with the real cycle usually shows which applies.
Further reading: Ball screw vs roller screw · Hydraulic to electric actuator · Linear actuators
Other roller screw actuator series
Spec builder
Specify what you need instead of EMC-HP electromechanical cylinder
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Bosch Rexroth EMC-HP electromechanical cylinder: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.