High-current slip rings
Rotary Systems Industrial slip ring SR004
Covered industrial slip ring rated 30 A at 600 V AC with threaded terminals, IP65 enclosure and 50 rpm maximum for slow-turning heavy equipment.
Key specifications
| Current per circuit (max) | 30 A |
|---|---|
| Voltage (max) | 600 V |
| Speed (max) | 50 rpm |
| Ingress protection | IP65 |
Summarised in our own words from Rotary Systems Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Rotary Systems Inc.. Rotary Systems and Industrial slip ring SR004 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Rotary Systems part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
Heavy-duty carbon-brush slip rings for very high current and voltage, with copper-graphite power rings and precious-metal signal rings. Large and heavy by design, but straightforward to maintain.
| Published maximum | Industrial slip ring SR004 | BHR Series Frameless Type (Carbon Brush) |
|---|---|---|
| Circuits | — | 76 |
| Current per circuit | 30 A | 500 A meets or exceeds |
| Speed | 50 rpm | 10 rpm |
| Voltage | 600 V | 20,000 V meets or exceeds |
这些数据是每个系列中发布的最高值，并非总是以相同方式测量的。较高的数据不一定是更好的选择：安装、工作周期、反馈、连接器和认证同样重要。工程师在推荐任何产品前，会检查其与您的应用是否匹配。
What a high-current slip ring is
A high-current slip ring is a rotary joint built to carry heavy power, typically tens to hundreds of amps per circuit, across continuous rotation. Instead of fine precious-metal wires, it uses wider rings in copper alloy or brass and brushes in copper graphite or silver graphite, sized to keep current density and contact heating within limits. Ring spacing and insulation are increased for higher working voltages. Many designs also carry low-level signal rings on precious-metal contacts in the same assembly, separated from the power section.
When engineers choose a high-current slip ring
Choose a high-current design when motors, heaters, magnets or welding equipment on the rotating side draw more than a standard ring can handle. It suits cranes, cable reels, welding positioners and heavy turntables. The trade-offs are size, weight, drag torque and brush dust: carbon-based brushes wear and need inspection, so maintenance access matters. Where rotation is limited to a few turns, a cable carrier or cable wrap may still be simpler. Keep sensitive signals physically separate from the power rings.
How to specify the Rotary Systems Industrial slip ring SR004
Send these with your enquiry and an engineer can confirm the right Industrial slip ring SR004 variant or an equivalent:
- Current per circuit, continuous and peak (A)
- Working voltage and required insulation level (V)
- Duty cycle and ambient temperature (°C)
- Speed, continuous and peak (rpm)
- Number of power circuits plus any signal or earth circuits
- Bore, envelope and mounting (mm)
- Brush inspection interval and maintenance access
Common mistakes to avoid
- Quoting the motor nameplate current but not the inrush or peak current at start-up
- Ignoring temperature rise in an enclosed housing, which derates current capacity
- Placing encoder or fieldbus rings right next to high-current motor feeds
- Leaving no access to inspect brushes and clean carbon dust
Rotary Systems Industrial slip ring SR004: frequently asked questions
What is the Rotary Systems Industrial slip ring SR004?
Covered industrial slip ring rated 30 A at 600 V AC with threaded terminals, IP65 enclosure and 50 rpm maximum for slow-turning heavy equipment. Published series figures include current per circuit 30 A, voltage 600 V, speed 50 rpm. It is made by Rotary Systems Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Rotary Systems Industrial slip ring SR004?
The Rotary Systems Industrial slip ring SR004 is made by Rotary Systems (Rotary Systems Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Rotary Systems Inc.; brand names are used only to identify the product.
What is the current per circuit of the Rotary Systems Industrial slip ring SR004?
The published series maximum current per circuit is 30 A. Individual models and sizes in the Industrial slip ring SR004 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Rotary Systems Industrial slip ring SR004?
Yes. On published figures, BHR Series Frameless Type (Carbon Brush) is the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
Why do high-current slip rings use carbon brushes rather than gold contacts?
Gold-wire contacts suit low currents because they give very low noise, but they cannot carry heavy current without overheating. Copper graphite and silver graphite brushes offer a large contact area, good conductivity and self-lubrication, which handles tens to hundreds of amps. The trade-off is brush wear and dust, so these units need inspection intervals and sensible enclosure design.
How much current can one slip ring circuit carry?
It depends on ring size, brush material, speed, ambient temperature and duty. Standard capsules typically manage a few amps per ring, while dedicated high-current units are commonly rated from tens of amps to several hundred amps per circuit. Always quote continuous, peak and duty cycle together, because a ring that is fine at 50% duty may overheat when run continuously.
Other high-current slip rings series
规格构建器
Specify what you need instead of Industrial slip ring SR004
选择您需要的每一个零件，回答应用工程师会提出的问题，并在我们要求任何详细信息之前查看您的摘要。
- 1产品
- 2性能
- 3环境
- 4数量
- 5您的规格
工程师支持
让我们经验丰富的工程师为您做繁重的工作
Tell us how you use the Rotary Systems Industrial slip ring SR004: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- 由工程师审查，而非自动回复
- 类似的和更好的替代方案
- 标准、改进和定制选项
更喜欢配置它？ 使用规格构建器。