Brand overview
Harmonic Drive
Originator of the strain-wave gear, with CSF, CSG, CSD and SHG/SHF gear units and FHA and SHA hollow-shaft actuators.
Harmonic Drive is a brand of Harmonic Drive SE / Harmonic Drive LLC (Germany / Japan / USA). SpecifyMotion is not affiliated with Harmonic Drive SE / Harmonic Drive LLC. This overview is written from the manufacturer's published information. We can help source parts or propose an equivalent solution.
Gearboxes
CSF-2A component sets
Harmonic Drive's general-purpose cup-type strain wave gear component set. It covers sizes from tiny instrument gears to very large robot-joint units, with zero backlash.
CSG-2A component sets
A high-torque version of the cup-type strain wave gear set. It carries more torque and lasts longer than CSF in the same size, with zero backlash.
CSD-2A component sets
A very flat cup-type strain wave gear set, about half the axial length of standard sets. It has a hollow through-bore for cables or shafts.
SHF-2A component sets
A silk-hat (top-hat) strain wave gear set with a large hollow centre, for designs that need cables or shafts passing through the gear.
SHG-2A component sets
A high-torque silk-hat strain wave gear set that pairs CSG-level torque with a large hollow centre. It is also sold as SHG-2UH/2SH/2SO gear units.
SHD-2SH gear units
A short, flat hollow-shaft strain wave gear unit with an output bearing. It is about half the length of SHG/HFUS units, for slim rotary axes.
CPU-M / CPU-H / CPU-S gear units
A strain wave gear unit with an integrated tilt-resistant output bearing. It comes in motor-mount (M), hollow-shaft (H) and input-shaft (S) versions.
CPL-2A component sets
A lightweight hollow-shaft gear component set with low inertia and a small outer diameter, for designs that supply their own output bearing. It is also offered with Harmonic Drive's Triangle tooth technology.
HPG Harmonic Planetary gearheads
A precision planetary gearhead for servo motors. It uses a flexible internal gear to keep backlash low over its life, with an optional reduced-backlash grade.
HPN Harmonic Planetary value series
A lower-cost inline planetary gearhead range from Harmonic Drive for general servo applications. It has wider backlash limits than HPG.
Harmonic actuators
FHA-C hollow-shaft servo actuators
A slim hollow-shaft servo actuator that combines a strain wave gear, AC servo motor and encoder in one flat unit, for direct-drive-style rotary positioning.
SHA-SG hollow-shaft servo actuators
A hollow-shaft servo actuator built on SHG high-torque gearing with a 17-bit absolute encoder option, offered from small to large robot-joint sizes.
SHA-CG hollow-shaft servo actuators
A hollow-shaft servo actuator variant using CSG-based gearing. It is available in 200 VAC and low-voltage 48 VDC versions in the smaller sizes.
RSF servo actuators (17A/20A/25A/32A)
A compact solid-shaft servo actuator that pairs a strain wave gear with an AC servo motor and incremental encoder, for precise rotary motion without a hollow shaft.
LPA low-profile actuator with integrated servo drive
A flat rotary actuator with zero-backlash strain wave gearing, a motor, dual absolute encoders and a 48 VDC servo drive built into one unit. It is controlled over CANopen or EtherCAT.
Sources
Spec builder
Specify Harmonic Drive parts or an equivalent
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Ask about Harmonic Drive parts or equivalents
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.