Strain-wave (harmonic) gear
Harmonic Drive SHG-2A component sets
A high-torque silk-hat strain wave gear set that pairs CSG-level torque with a large hollow centre. It is also sold as SHG-2UH/2SH/2SO gear units.
Key specifications
| Bore (max) | 80 mm |
|---|---|
| Rated torque (max) | 1,236 Nm |
| Peak torque (max) | 6,175 Nm |
| Ratio | 50–160:1 |
| Backlash (max) | 0 arcmin |
| Sizes | 14, 17, 20, 25, 32, 40, 45, 50, 58, 65 |
Summarised in our own words from Harmonic Drive SE / Harmonic Drive LLC's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
Maxima are for SHG-65: rated 1236 Nm, repeated peak 3419 Nm (65-160) and momentary peak 6175 Nm. The 80 mm bore is the maximum for the SHG-2UH/2SH hollow-shaft gear units (14–80 mm, Harmonic Drive SE); the bare 2A set lists no bore figure. Power density is up to 510 Nm/kg. Backlash is zero, with accuracy of 1–1.5 arcmin.
Specify Motion is not affiliated with Harmonic Drive SE / Harmonic Drive LLC. Harmonic Drive and SHG-2A component sets are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Harmonic Drive part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Cup-type strain-wave gear component sets for building your own joint; the LCSG high-torque version lifts capacity by around 30% over the standard LCS.
| Published maximum | SHG-2A component sets | LCS / LCSG |
|---|---|---|
| Rated torque | 1,236 Nm | — |
| Peak torque | 6,175 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0 arcmin | — |
Hollow-shaft strain-wave gear units with a large central bore for routing cables and services; LHSG is the high-torque version (over 30% more torque).
| Published maximum | SHG-2A component sets | LHS / LHSG |
|---|---|---|
| Rated torque | 1,236 Nm | — |
| Peak torque | 6,175 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0 arcmin | — |
Ultra-flat cup-type strain-wave gear with a very short axial length, light weight and high stiffness for its size.
| Published maximum | SHG-2A component sets | LCD |
|---|---|---|
| Rated torque | 1,236 Nm | — |
| Peak torque | 6,175 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0 arcmin | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other strain-wave (harmonic) gear series
Spec builder
Specify what you need instead of SHG-2A component sets
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Harmonic Drive SHG-2A component sets: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.