Capsule slip rings
Compact solid-shaft units for low-current signals and power where space is tight.
Series compared
| Brand | Series | Circuits | Current | Speed | Bore / OD |
|---|---|---|---|---|---|
| Motion Control Products | AR/BR/CR Series Capsule Slip Rings | 76 | 15 A | 300 rpm | OD up to 35.5 mm |
| Moog | SRA-73540 | 12 | 2 A | 250 rpm | OD up to 11.17 mm |
| Moog | SRA-73625 | 18 | 2 A | 100 rpm | OD up to 11.18 mm |
| Moog | AC6373 | 12 | 2 A | 100 rpm | OD up to 12.7 mm |
| Moog | SRA-73762 | 24 | 2 A | 250 rpm | OD up to 15.5 mm |
| Moog | SRA-73526 / SRA-73528 / SRA-73599 | 24 | 2 A | 250 rpm | OD up to 22.1 mm |
| Moog | AC6023 | 24 | 2 A | 250 rpm | OD up to 22.1 mm |
| Moog | AC6305 | 15 | 5 A | 250 rpm | OD up to 22.1 mm |
| Moog | AC6310 | 9 | 10 A | 250 rpm | OD up to 22.1 mm |
| Moog | SRA-73574 / SRA-73587 | 36 | 10 A | 250 rpm | OD up to 22 mm |
| Moog | AC6355 | 56 | 5 A | 250 rpm | OD up to 25.4 mm |
| Moog | AC7356 | 56 | 10 A | 250 rpm | — |
| Moog | AC7094 | 48 | 5 A | 250 rpm | OD up to 55.1 mm |
| Moog | AC7036 | — | 15 A | 150 rpm | OD up to 78.74 mm |
| Moog | AC7212 | — | 10 A | 250 rpm | OD up to 99.06 mm |
| Moog | P Series | 8 | 14 A | 600 rpm | OD up to 31.7 mm |
| Moog | Rotoflux ESR 70 | 24 | 20 A | 200 rpm | OD up to 70 mm |
| Moog | Rotoflux ESR 110 | 32 | 30 A | 150 rpm | OD up to 110 mm |
| Moog | Miniature gold capsules (AC264, AC267, AC6292, RE4815, RK4288) | 95 | 2 A | 600 rpm | — |
| Moog | M Series (1021202) | 120 | 2 A | 1000 rpm | OD up to 68.6 mm |
| Servotecnica | SVTS A (A 01-A 07) | 56 | 8 A | 500 rpm | OD up to 25 mm |
Maximum figures across each series, summarised from manufacturers' published data on the date shown on each series page. Always confirm against the current datasheet.
Where capsule slip rings are used
Spec builder
Configure capsule slip rings
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Step 1 of 5
Engineer support
Let our experienced engineers do the hard work for you
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.