Through-bore slip ringsLegacy
Moog AC6349 / AC6875
One-inch bore slip ring carrying 15 A per circuit at up to 440 VAC; AC6875 was the IP65-sealed version. Moog lists both as end-of-life legacy products.
Moog lists this series as legacy. We can help with spares for installed machines, a migration to the replacement, or an alternative.
Key specifications
| Circuits (max) | 24 |
|---|---|
| Current per circuit (max) | 15 A |
| Voltage (max) | 440 V |
| Speed (max) | 250 rpm |
| Bore | 25.4–25.4 mm |
| Outer diameter | 78–78 mm |
| Ingress protection | IP65 (AC6875) |
| Temperature | -40–80 °C |
Summarised in our own words from Moog Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
Listed on Moog legacy page: not for new designs.
Specify Motion is not affiliated with Moog Inc.. Moog and AC6349 / AC6875 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Moog part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
Through-bore slip rings with a hollow centre so shafts, pipes or cables can pass through, carrying power, signal and fieldbus data. Standard bores run from 12.7 mm to 100 mm and custom bores are offered.
| Published maximum | AC6349 / AC6875 | ER Series Through Bore Slip Ring |
|---|---|---|
| Circuits | 24 | 24 meets or exceeds |
| Current per circuit | 15 A | 15 A meets or exceeds |
| Speed | 250 rpm | 300 rpm meets or exceeds |
| Voltage | 440 V | 380 V |
| Bore | 25.4 mm | 100 mm meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other through-bore slip rings series
Spec builder
Specify what you need instead of AC6349 / AC6875
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Moog AC6349 / AC6875: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.