Linear motor drive
LinMot E1400 (E1400-GP / E1430 / E1450)
A mains-powered 3-phase AC servo drive for the P10-54 and P10-70 industrial linear motors. It has a wide set of fieldbus variants and STO.
Key specifications
| Ingress protection | IP20 |
|---|---|
| Supply | 3x400–480 VAC 50/60 Hz |
| Fieldbus | CANopen, LinRS, PROFIBUS DP, EtherCAT, EtherCAT CoE, EtherNet/IP, LinUDP, PROFIdrive, POWERLINK, PROFINET, Sercos III, Sercos over EtherCAT |
Summarised in our own words from NTI AG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Every ordering code is rated '3x400/480VAC / 28A', but the datasheet does not say whether 28 A is continuous or peak, so the current fields are left null. Motor supply is listed as 200–480 VAC on the product page. Safety features are Safe Torque Off (-1S) and 'Safe Limited Speed Ready'. The E1400 datasheet is Edition 24.
Specify Motion is not affiliated with NTI AG. LinMot and E1400 (E1400-GP / E1430 / E1450) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a LinMot part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
Kinco drives for linear motors and direct-drive systems on 220 VAC, 3-11 Arms continuous, with pulse inputs up to 4 MHz or EtherCAT.
View DD2S Series Linear Motor Drivers →Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other linear motor drive series
Spec builder
Specify what you need instead of E1400 (E1400-GP / E1430 / E1450)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the LinMot E1400 (E1400-GP / E1430 / E1450): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.