Skip to content

Integrated-motor actuator

Exlar Tritex II T2X (AC linear actuator)

Roller-screw actuator with motor, servo drive and position controller all built in, running from single-phase AC mains and accepting analogue, Modbus or optional industrial Ethernet commands.

Key specifications

Ingress protectionIP65S
Temperature-20–65 °C
Force (max)24,020 N
Continuous force14,341 N
Stroke (max)457 mm
Linear speed (max)953 mm/s
Screw lead2.54, 5.08, 12.7, 19.05
Screw typeroller screw (inverted / planetary)
Supply115-230 Vac single phase (highlights state 100-240 Vac 1-ph)
SizesT2X090 (90 mm): up to 6,619 N cont / 12,010 N peak; strokes 76-457 mm; up to 846 mm/s, T2X115 (115 mm): up to 14,341 N cont / 24,020 N peak; strokes 102-457 mm; up to 953 mm/s

Summarised in our own words from Curtiss-Wright Actuation Group's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2

Notes on this data

Manufacturer prints lbf with N in brackets and in/s with mm/s; N and mm/s values used as printed. Leads published in inches (0.1, 0.2, 0.5, 0.75 in x 25.4 = 2.54, 5.08, 12.7, 19.05 mm, converted). Category page headline 'up to 24 kN, 953 mm/s'. -40 C available on request. Comms: analog/digital I/O, RS485 Modbus RTU; options 4-20 mA, EtherNet/IP, PROFINET IO, Modbus TCP; Class 1 Div 2 option. Partial legacy status: T2M variant reorders only; T2X075 now appears in a combined 'TDX & T2X075' legacy catalogue; one T2X115 footnote marked 'Legacy Product' without clear scope.

Specify Motion is not affiliated with Curtiss-Wright Actuation Group. Exlar and Tritex II T2X (AC linear actuator) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.

Typical applications

Hydraulic cylinder replacementFactory automation following analogue commandProcess controlEntertainment

Alternatives that meet or exceed these figures

Engineers often come to us with an Exlar part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.

Meets or exceeds on all 3 published figures compared

Rod actuator with a built-in servo motor driving a ball or roller screw, in four sizes up to 30.6 kN, offered in white food-grade and black heavy-duty finishes.

Published maximumTritex II T2X (AC linear actuator)IMA Integrated Motor Actuator
Force24,020 N30,600 N meets or exceeds
Stroke457 mm457 mm meets or exceeds
Speed953 mm/s1,334 mm/s meets or exceeds
View IMA Integrated Motor Actuator →
Roller screw actuator

Tolomatic RSA-HT (high thrust)

Meets or exceeds on all 3 published figures compared

Heavy-duty version of the RSA rod actuator with roller-screw options, matched angular-contact bearings and larger motor mounts, reaching 58 kN on size 64.

Published maximumTritex II T2X (AC linear actuator)RSA-HT (high thrust)
Force24,020 N58,000 N meets or exceeds
Stroke457 mm1,524 mm meets or exceeds
Speed953 mm/s3,124 mm/s meets or exceeds
View RSA-HT (high thrust) →
Meets or exceeds on all 3 published figures compared

Ball-screw servo electric cylinder in seven frame sizes from 32 to 150, with inline or reverse-parallel motor mounting and optional force sensing, aimed at hydraulic and pneumatic replacement.

Published maximumTritex II T2X (AC linear actuator)SRB Linear Servo Actuator
Force24,020 N49,033 N meets or exceeds
Stroke457 mm1,000 mm meets or exceeds
Speed953 mm/s1,250 mm/s meets or exceeds
View SRB Linear Servo Actuator →

Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.

Other integrated-motor actuator series

Spec builder

Specify what you need instead of Tritex II T2X (AC linear actuator)

Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.

  1. 1Products
  2. 2Performance
  3. 3Environment
  4. 4Volumes
  5. 5Your spec
Step 1 of 5

Engineer support

Let our experienced engineers do the hard work for you

Tell us how you use the Exlar Tritex II T2X (AC linear actuator): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.

  • Reviewed by an engineer, not an autoresponder
  • Like-for-like and better-fit alternatives
  • Standard, modified and custom options

Prefer to configure it? Use the spec builder.

We use your details to answer this enquiry and share them with the specialist engineering and supply partner best placed to fulfil it. See our privacy notice.

Ask an engineer